PPV suspension for non-PPV Tahoe

[cuco]

Hi everyone,

I am looking into installing PPV suspension into my 2015 Tahoe LS. Rode on my local Fire Department's Tahoe last week and loved the firmer ride plus the level look. Having trouble finding the right strut/coil part numbers on the GM parts websites cause they list the same part numbers for PPV and non-PPV cars. Some help and direction would be greatly appreciated!

 

[Eod1]

Check with belltech.

 

[Eod1]

I just found a salvaged 2012 tahoe that I'm going to strip it down and use the parts on a 2012 suburban to do a suburban ppv.

 

[cuco]

I just found a salvaged 2012 tahoe that I'm going to strip it down and use the parts on a 2012 suburban to do a suburban ppv.

Thats awesome...with some luck I might find a 2015 ppv and do the same for the suspension


Sent from my iPhone using Tapatalk

 

[Kpwweb]

I believe the PPV suspension is by Whiteline-an Australian company? Check around for them.

 

[SuperDave]

Front springs part# 25876860
Rear springs part# 15200994

As far as struts go, I would just get Bilsteins for a better ride quality.

 

[16ppv]

i have PPV suspension off a 2016 if you like. There are four springs and four struts. They have about 10k miles on them. Went with taller suspension.
LMK!

 

[Morales1995]

i have PPV suspension off a 2016 if you like. There are four springs and four struts. They have about 10k miles on them. Went with taller suspension.
LMK!

Would these go in a 2010 PPV and if so can you get in touch with me I’ll buy them off you.

 

[AZCreeker]

So guys, I just saw a nice blue one unmarked. I thought they looked lower just because on 17 and smaller tires, but so they DO seat lower front and back compared to a LS/LT/Premier? Makes them look so nice and blocky.

 

[SuperDave]

The front springs from what I gather are the same as any 2wd Silverado. The rears are in fact a separate part # related to the PPV. The lower stance is related to the short sidewall tire used.