RED '**---->my 02 build thread

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
B

bansil

Member
Joined
Oct 21, 2014
Posts
36
Reaction score
1
Location
East TN in the MNTS
need a small inverter to power my car-puter I am going to install, so I found time to turn this 15 yr old one into a "new" one
2014-10-26115646_zps890b14fa.jpg

take apart and clean, sandblast outside

2014-10-26120155_zps5bef36eb.jpg

paint and bake

2014-11-01073540_zpsf0a4cd00.jpg

then I made new stickers for it

2014-11-01185825_zps442dc134.jpg


also started on my next project, I modified cup holder with some led's so I can see to put drink in

drilled 2 holes
2014-10-26094324_zps7cc08bb9.jpg

inserted led's with resisters and leads

2014-10-26094248_zps358a7dbb.jpg

drop of super glue

2014-10-26094604_zpsbc3f30c2.jpg

and here we go

2014-10-26094301_zps40b65a7d.jpg

still need to hook up
 

tgui

Full Access Member
Joined
Feb 17, 2014
Posts
859
Reaction score
816
Neat!

A carputer plus something like Arduino controlling relays and whatnot could be a ton of fun.
 
OP
OP
B

bansil

Member
Joined
Oct 21, 2014
Posts
36
Reaction score
1
Location
East TN in the MNTS
been busy with so many other things, did get to color match a small amp for subs
2014-11-15181114_zps8896df55.jpg

got drvside led swap done, I alos added an "aux power out" for future lighting


2014-11-16144805_zps73e42d2f.jpg

2014-11-16164140_zps75e8b2f4.jpg

and some ambiance :jester:
2014-11-16164148_zpsde6d5746.jpg

not too bright, just nice glow (will see in the morning drive to work :party52:

next to finish up other doors and add "puddle leds " into bottoms of door panels
 
OP
OP
B

bansil

Member
Joined
Oct 21, 2014
Posts
36
Reaction score
1
Location
East TN in the MNTS
pulled out an old skool band pass box I had circa 1989 :wtf:

and cleaned it up, added led's and new subs and just had fun with it,

it may be too loud for my old ears now :jester:

2014-11-30155211_zps572f57c3.jpg

I had some copper tubing laying around and used it as wire chases
2014-11-30155221_zpsce3ccc37.jpg

and finally some sandblasting, black paint and some time with plotter a "brick wall with graffiti" (plastic was scratched up, so easy mod to hide finish, still glossy and clean on bottom side) I added red leds under the glass edges

2014-11-30155229_zpsf0ab1e4f.jpg

once again wife asked how old I was :roflbow:
 
OP
OP
B

bansil

Member
Joined
Oct 21, 2014
Posts
36
Reaction score
1
Location
East TN in the MNTS
so this morning's job was to get rid of using the tape deck adapter and the static and noise from that

2014-12-05075256_zps2fc01f67.jpg

tin foil to protect board from oopsseess
2014-12-05075308_zps435122cb.jpg

done...next
2014-12-05081154_zpsfd27061d.jpg

I dint have anymore leds so...candy **** red nail polish :licklips:
2014-12-05083749_zpsf4898e0f.jpg
it worked 30 years ago...we will see tonite

2014-12-05091333_zps314d25a9.jpg

2014-12-05091326_zps28a387d6.jpg

sounds great...and a this mornings breakfast picture :party52:

2014-12-05095243_zpsee6aa1d8.jpg
 

Blue2002Tahoe

Full Access Member
Joined
Jul 22, 2013
Posts
313
Reaction score
7
Wow you've been busy. I'll be interested to see how your nail polish job looks
 
Top