RED '**---->my 02 build thread

[bansil]

Been lurking, gathering data

Have wanted a tahoe for years; cue: kids,college and now #&*% (FBHO)

I bought her, she is sexy "arrest me" red and 13 years old......now....now

She has 128K on her chassis and shows a few GM flakes of her clear.....wow...

And talk about stacked!!!

She has 89 options (according to a vin search) and they all.....work!!......


I have folder full of quick mods I have saved up.....will do write ups and a build thread


Also she is 4wd, 3.73's and G80 which is nice and tight


Her she is at work yesterday



Only Red one I found in my search, and the three tone interior is growing on me

Her backside



First thing to do?

Grab my folder of saved mods to do



---------- Post added at 06:15 AM ---------- Previous post was at 05:58 AM ----------

First mod was the high pass wiring mod for stereo, not the neatest one


hardest part was "breaking loose" the amp from mount to move it for install of cable, it was "glued" with 2 sided tape???must of been a rattle at some point



Amazing difference in sound quality

so now the factory sub really sounded like shit!!

so....tear apart back of truck


find this:


and since I didnt have any silicone....I used Plumbers putty



installed



sounded good except for the rattle...who was the genius that designed this



I rolled up a rag and stuffed it behind the box and then grabbed a 1/2 in ling screw with washer.....no more rattle


next mod?

4 high mod
simple 5 min job

pop out light and splice into yellow wire and ground it out


walla'


So a nice 3hr date with my **' turned out great with all the pre planning done...next?

Speakers, since two sound bad, now that they have bass to them

 

[YukonXL04]

Congrats on the purchase and welcome to the forum. Beware once the mods start they never end!

 

[bansil]

first step, remove dash bezel

then 7mm(socket size) bolts x 4

well, she decided to bite as I pulled on her gage cluster

I know "dont be a pansy" I am still on blood thinners so I had to stop the bleeding....3 bandaids later


pop off back black plastic


remove 6 larger light bulbs


grab a hand full of sockets and LED's


and replace them

remember to not over "tighten/turn them" because you will not make electrical contact

see the contacts?


see the contact strips on the board?


and notice the "groove" in the sockets, which is too long for our dashes?


so turn them enough to stay in the hole and have contact with board


repeat 6 times


put back together, before final assy make sure polarity is correct, you may have to spin bulb sockets 180*....i will find out tonite

next door lights, small screwdriver on the "RED" end will pop them out

the 5 LED bulbs dont fit into the sockets...so....

break out your step drill and open them up



open up to 1/2 inch


install bulb and repeat around the truck


next?

fire up grill, open a beer and precook meat for dinner

 

[Tahoewhat]

This is a great build thread - pictures information and end result. Very nice.

Never heard of the wire high pass mod? - (never had stock radio either though)

 

[OHSIXX]

Great progress so far.......

 

[bansil]

Thanks ya'll

gotta check out my bus build

time for updates, just got back from the winery

dash...yup...red not blue...I have 100 more leds for everything else



so when we leave winery...we have nothing but dirt until we get home (5miles of road actually)










well......mama said "why does it smell like paint?"

ugh..ugh..oops...she rolled her eyes....





grills look alot better in person??? no streaks etc...weird

she actually said "you know your 45 and not a kid....

oh and door lights

 

[Blue2002Tahoe]

Great build thread! Nice to see someone else paint the speaker grilles too, are you planning on painting more of the interior red or just the grilles?

 

[bansil]

thanks

more will get painted, like the inserts around door handles

need to pack bus, so projects may be delayed for a couple weeks

 

[tgui]

I have an 02 as well! I love the red.

Check your front diff fluid and magnet when you get a chance. I get the feeling that the front diffs eat bearings more often than not. I sure found a nasty surprise!!

 

[bansil]

will do thanks for heads up, are these unit bearing front ends?
and I suppose locking hubs are "not an option"