Remote Start ideas

[Fubar0715]

Hi all,

I have been kicking around the idea of doing the OE install by the stealership for remote start...I stubmled across a youtube video showing the install of an aftermarket system. I have exchanged a few emails with the vendor asking about my particular setup (pre-wire versus existing) for remote start. They report that their stuff plug and plays with my pre-wire....

Anyone have any experience with them or thoughts????
https://www.12volt.solutions/collec...te-start-kit-key-start?variant=31981359661159

Thanks!

 

[1BADI5]

Mine was already OEM remote start prepped (RPO AP8)

I bought the kit (2 OEM remotes and the code for the dealer to enable/activate). The dealer charged me 1 hr labor to install and program the remotes.

I know there are other options, but I did not want to install more wiring and shit

 

[Fubar0715]

Mine was already OEM remote start prepped (RPO AP8)

I bought the kit (2 OEM remotes and the code for the dealer to enable/activate). The dealer charged me 1 hr labor to install and program the remotes.

I know there are other options, but I did not want to install more wiring and shit

Do you remember what the cost was?

 

[1BADI5]

Do you remember what the cost was?

I searched the internet for awhile before I found it, it was right around $200 shipped.

I think I have the part number someplace in my build thread.

 

[Fubar0715]

I will take a look at the build thread....maybe I can come up with the part number....I would rather have OE but if the cost is way pricey then it doesnt make sense to go that route. Thanks Jeremy!

 

[Sparksalot]

What kit are you referring to?

Mine was already OEM remote start prepped (RPO AP8)

I bought the kit (2 OEM remotes and the code for the dealer to enable/activate). The dealer charged me 1 hr labor to install and program the remotes.

I know there are other options, but I did not want to install more wiring and shit

Mine was already OEM remote start prepped (RPO AP8)

I bought the kit (2 OEM remotes and the code for the dealer to enable/activate). The dealer charged me 1 hr labor to install and program the remotes.

I know there are other options, but I did not want to install more wiring and shit

which kit was that? If you bought the programming code/time then why did the stealership charge even more?

 

[Fubar0715]

I must be drinking the **** juice today-cannot find your build thread......Any chance you can provide a map and flashlight????

 

[1BADI5]

What kit are you referring to?


which kit was that? If you bought the programming code/time then why did the stealership charge even more?

Its has to dealing with flashing the BCM

 

[1BADI5]

I must be drinking the **** juice today-cannot find your build thread......Any chance you can provide a map and flashlight????

LMAOP....... bee there and done that. Here you go!

https://www.tahoeyukonforum.com/threads/got-my-2010-ppv.114903/

 

[1BADI5]

Here you go:

GM part 19154445