Replacing engine

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Dan2002

Member
Joined
Apr 27, 2017
Posts
63
Reaction score
30
I just recently acquired a 2007 suburban. Got it very cheap and it's in very good condition interior/body .

Seems like the previous owner did not do regular maintenance. Very dark oil and it blew a bearing through the oil pan.

Now i am wondering if i go and replace the engine with an engine close to the 2007 year. ?

What's the difference if i go for a older engine such as a 2003 with 124,000 miles,

Or maybe a newer model 2012?

Which would be the best route?
 

avalonandl

Full Access Member
Joined
Apr 6, 2019
Posts
2,200
Reaction score
2,635
Location
Troy, MICH & Naples, FL
They changed the LS enines from a 24x to 58x Reluctor at some point. Check the model compatibity. Also Check with Jasper engines.
 

Dustin Jackson

Full Access Member
Joined
Aug 9, 2018
Posts
1,544
Reaction score
1,741
@Dan2002 In my research I found it is too much work to try to get an older motor to work. It seems like they are very similar but they are not, the knock sensor is just one example.

I looked at this one but ended up just rebuilding it myself.
 
OP
OP
D

Dan2002

Member
Joined
Apr 27, 2017
Posts
63
Reaction score
30
@Dan2002 In my research I found it is too much work to try to get an older motor to work. It seems like they are very similar but they are not, the knock sensor is just one example.

I looked at this one but ended up just rebuilding it myself.
Do you know which years i should be looking for then?
 

Geotrash

Dave
Supporting Member
Joined
Feb 16, 2018
Posts
6,440
Reaction score
15,970
Location
Richmond, VA
If I were you I'd be looking for a L92 to put in there (6.2L with no AFM).

But if you're looking for a 5.3, any Gen IV 5.3 should do (e.g., 2007-2013).
 

89Suburban

Bull in the china shop
Supporting Member
Joined
Jan 10, 2013
Posts
15,159
Reaction score
42,039
Location
SE PA
If I were you I'd be looking for a L92 to put in there (6.2L with no AFM).

But if you're looking for a 5.3, any Gen IV 5.3 should do (e.g., 2007-2013).
Is that a direct bolt in/plug n' play?
 

Forum statistics

Threads
132,404
Posts
1,867,516
Members
97,062
Latest member
ChubbyMessiah
Top