Hi everyone, first day here on the site. Just got a 2025 Yukon Danali, I was wondering if anyone knows where I can get black/chrome letters to replace the red/chrome GMC letters on the front grill? There's so many "GMC" replacement letters out there, I was wondering if any of those are the same size as they are on this Denali. I haven't seen any site that has specifically for the 2025 Denali yet. THANKS!
Replacing red GMC letters on front grill
- Thread starter julio62
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
StephenPT
Full Access Member
I bought a $10 roll of matte black vinyl wrap and had enough to do both the front and back red GMC letters. First time doing vinyl wrap - watched a couple of YouTube videos and here’s the result…
Last edited:
Welcome to the forum from Oregon.
A few options at ebay but looks like they end at 2024. Might contact the sellers and see if available. Or do the vinyl wrap, like @StephenPT did.
A few options at ebay but looks like they end at 2024. Might contact the sellers and see if available. Or do the vinyl wrap, like @StephenPT did.
Joseph Garcia
Supporting Member
- Joined
- Aug 2, 2018
- Posts
- 7,366
- Reaction score
- 9,971
Welcome to the Forum from NH.
Lots of knowledgeable folks here who freely share their knowledge, experiences, and perspectives. Knowledge is power.
I hope that you will become a participating member in the Forum's discussions.
Pics of the truck, please.
You are already receiving sage advice from the knowledgeable folks on this Forum.
Lots of knowledgeable folks here who freely share their knowledge, experiences, and perspectives. Knowledge is power.
I hope that you will become a participating member in the Forum's discussions.
Pics of the truck, please.
You are already receiving sage advice from the knowledgeable folks on this Forum.
That looks really good. Thanks for the info. I thought about that, but just figured it might come out kind of sloppy looking. But looks like the letters are really clean, and the "tucked" into the edges really well. I think I'll give it a try. Thanks.
KMeloney
Full Access Member
- Joined
- May 2, 2009
- Posts
- 2,836
- Reaction score
- 288
I’d check out gmpartsdirect.com and see if they have replacement badges for ‘25s. Might even be able to tell whether it’s the same part as for previous years.
Personally, I’d go with an illuminated one.
Personally, I’d go with an illuminated one.
Thanks for the suggestion, I'm checking out that site right now. New to GMC so I have to get in touch with the corresponding sites and info.
