Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
About 2 years, 15k miles.
You're right that I didn't put a washer there; I don't know why I missed that although the pictures and description in the instructions don't show washers NOR do they mention washers. Like so many manufacturers, DJM's instructions are missing something that is critical. I mean, it should be obvious that washers should be installed there but if they at least say something about them there would be no question. Here's all they say : "Bolt the swaybar to the outside of the endlink using 1/2" x 2-3/4" bolts (Fig #7)" , and you can't see any washers in figure #7. I probably used one of the washers at the top of an endlink where it says to use factory hardware, maybe because one of the factory washers was missing, I'm not sure. Anyway, thanks for noticing that missing part.
Nice, but I was looking at Wilwoods front and back for about $4k; those are $2500 just for the front. And besides...Nice looking..how about some 2018 RST Brakes?!..6 piston brembo. did a little searching thru GMs parts bin and cross referenced part#s..I sure do believe they would fit..Red of course. Not sure about the rears...https://www.summitracing.com/parts/nal-84263234
Sent from my SAMSUNG-SM-T377A using Tapatalk
Yes I did. But my daughter is one happy girl. She loves that car.
Ironic because mine is going towards my son's truck!! Don't worry it comes back 10 fold lol..that #1 dad cup makes it worth it.
