They went right up to the box around the front camera over the texture. It did look a little funky initially, but the tint settled in place after a couple days (don't touch it), and this is what it looks like currently in that area. I had the dashcam installed right on top of the tint (3rd car I have done this on without issue). 3M used to be the goto tint for a lot of places, but the place I had do it here in Denver uses Llumar ceramic... It's a little on the pricey side (it was about $500 all around the truck), and you could probably get it cheaper if you are just matching the front to the factory rear and forgoing the pano. I think it was worth the cost and its noticeably cooler in an all black interior.
Just remember, I did 5% all around (except windshield is 35%)... the sides are dark at night and normally not an issue on the road in well lit areas, but backing out of a dark driveway in the country, I gotta roll the windows down. It does help that these trucks have the surround cams though too. The windshield tint isn't an issue day or night... you can see out of it just fine at that percentage.
View attachment 350267