Show off your 2015-2020 lowered tahoes and yukons

[crazycrew]

I second this. I had a similar issue as you did when I first installed my lowering kit and adjusted my rear sensor rods and it ended up leveling out all 4 corners. It’s hard to get it perfect with these GM Trucks but mine is within <1/8” from passenger to driver side and I’m happy with it. It doesn’t take much adjustment either; For every 1/8" change in sensor rod length you’ll change the ride height by 3/4".

Exactly as stated. My rods are set @ 2 11/16"

Sent from my SM-G955U using Tapatalk

 

[gat0r]

^^^ What calipers do you have? To date, I've had 3 sets stripped, re-coated, lettering, and clear coated. Much easier to clean and maintain. Plus they keep that fresh look and no more fading. Win / win.

StopTech Trophy Sport Big Brake Kit. (15" w/ 6 piston on all 4 corners)

'Callaway' is engraved in them.

 

[Staggered 02]

Hmm I see. Those should look great. The new set of Wilwoods that I put on my CC started to stain and fade within a few months. It was then that I decided to get another set and have them refinished. Did one set in red with black lettering and another in charcoal with black letters.

 

[Chevy*808*]

 

[Tahoen]

 

[Staggered 02]

^^^^ Very nice.

Here's the Escalade taken this evening.

 

[Fsuhammond]

2/4 belltech, 26” Denali reps
Only getting 1/2.5 out the setup

 

[lynxnova]

Before and after, Norcal SS 2/4 drop

View attachment 196982

Nice truck man! What are the measurements on all 4 corners?


Sent from my iPhone using Tapatalk

 

[lynxnova]

2/4 belltech, 26” Denali reps
Only getting 1/2.5 out the setup

View attachment 246675

Sweet ride man! When you said only getting 1/2.5 out the setup what exactly do you mean? I have an 17 Escalade and I just installed the 2/3-4 drop kit by NorCal and I’m only getting 1” drop in the front. The rear I got the 4” . I’ve used this set up before and I’ve gotten the 2” in front. I spoke with NorCal and he said that the Escalades have 3 different spring rates which will affect the drop in front somewhat.


Sent from my iPhone using Tapatalk

 

[Fsuhammond]

It has settled to closer to 1.75” in the front and after shortening the sensor rod to 2.61” the rear is closer to 3.5 now.