Show off your 2015+ leveled Tahoes and Yukons!

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Nokturnal

Full Access Member
Joined
Jul 25, 2018
Posts
154
Reaction score
169
And now went another 1/2” in the front (from 2” to 2.5). Ended up with suspensionmaxx 2.5/1 all said and done, probably should have started there :)
View attachment 260265


Love the blacked out grill! So many folks upgrading straight to the Denali new/old style grills. The blacked out SLt grill looks good. I’m To try that look on mine and I bought the chrome grill inserts to paint black as well. I don’t think I’ve seen anyone with that setup. I’ll post pics when I get it all on.

4B24ABBB-C98E-45DB-BA68-147FE4D1B510.jpeg 8D826E78-3D9D-4309-8DA9-8D3ABD8DCAFD.jpeg
 

cmhorns

TYF Newbie
Joined
Aug 2, 2020
Posts
28
Reaction score
14
Looking for suggestions and comments... Please?
About to order some new wheels and tires for our leveled 2018 Chevy Tahoe Z71

Thinking about 20x9 0mm offset, with Toyo OpenCountry A/T 3 in 295/55/20's
Similar to anything anyone is running? Or have tried?

Compared to stock 265/65/18, RimsnTires measurements show they'll be:
1.2" wider (11.6)
stick out 1.5" further
1.3" taller (32.8)

I don't mind trimming the bumper skin or adjusting wheel well or even putting a 4" lift on it (like bds, fabtech, or zone) if needed, but I'm wondering will it fit as is? What do you guys suggest or think?

Thanks!
 

nick14226

Full Access Member
Joined
Nov 22, 2019
Posts
238
Reaction score
231
Looking for suggestions and comments... Please?
About to order some new wheels and tires for our leveled 2018 Chevy Tahoe Z71

Thinking about 20x9 0mm offset, with Toyo OpenCountry A/T 3 in 295/55/20's
Similar to anything anyone is running? Or have tried?

Compared to stock 265/65/18, RimsnTires measurements show they'll be:
1.2" wider (11.6)
stick out 1.5" further
1.3" taller (32.8)

I don't mind trimming the bumper skin or adjusting wheel well or even putting a 4" lift on it (like bds, fabtech, or zone) if needed, but I'm wondering will it fit as is? What do you guys suggest or think?

Thanks!
I was running 305/45R22 on 22x9 with 0mm offset on a 2” level on my 17 Yukon. Those tires are the same diameter as what you’re considering but mine were also 10mm wider. I had already trimmed the front valance for looks (not sure if it would have touched there) and had to persuade the wheelwell a bit at the back as well. You can find pics of what I did on one of the previous pages. I’d say being a bit narrower with the 295 you’ll clear or just barely rub on the rear of the wheelwells
 

nick14226

Full Access Member
Joined
Nov 22, 2019
Posts
238
Reaction score
231
Love the blacked out grill! So many folks upgrading straight to the Denali new/old style grills. The blacked out SLt grill looks good. I’m To try that look on mine and I bought the chrome grill inserts to paint black as well. I don’t think I’ve seen anyone with that setup. I’ll post pics when I get it all on.

View attachment 265517 View attachment 265518
Thanks! Yeah I had the outer border/trim wrapped in gloss black vinyl. Look forward to seeing yours in all black, the inserts should be a nice touch!
 

cmhorns

TYF Newbie
Joined
Aug 2, 2020
Posts
28
Reaction score
14
I was running 305/45R22 on 22x9 with 0mm offset on a 2” level on my 17 Yukon. Those tires are the same diameter as what you’re considering but mine were also 10mm wider. I had already trimmed the front valance for looks (not sure if it would have touched there) and had to persuade the wheelwell a bit at the back as well. You can find pics of what I did on one of the previous pages. I’d say being a bit narrower with the 295 you’ll clear or just barely rub on the rear of the wheelwells
Thank you very much for your input! It's a pain trying to find information when your about to change wheel and tire sizes, this website has got to be the best!
You certainly can't depend on the little smug guys behind the counter at all the shops, that'll tell you, "nope it won't work, my computer says you have to go with stock sizes!" lol
 

Greg Kulbick

Full Access Member
Joined
Apr 25, 2012
Posts
121
Reaction score
311
Location
Tallahassee, FL
Hey everybody. Recently got a second GM SUV, 2016 Suburban. Has anyone ran into any issues leveling the front, or going 2.5fr/1.5rr with the ZW7 suspension?
 

Forum statistics

Threads
132,312
Posts
1,865,768
Members
96,904
Latest member
Nix409

Latest posts

Top