snapped this piece on the evap system

[BlueCollarTahoe]

so if youre following my struggle with the MPG and a EVAP code youll know im putting hands on everything and changing parts and what not lol so i changed the piece that goes into the intake manifold. the one in the pic is the replacement. i changed all the parts in the back end of the system too but i went to double check this piece was in snug and snapped that connector. heres the pic


snapped on the side of that cap that goes onto that valve thing. anyone know parts numbers? i saw this at the autzone think it would work for a fix for now?


https://www.amazon.com/Dorman-800-059-Nylon-Fuel-Repairkit/dp/B000CIR1O8

looks mroe or less the same thing. need a new cap as the hose/line broke clean off the side of it. or parts numbers to replace

 

[BlueCollarTahoe]

Bump

 

[afpj]

That'd be the purge solenoid. Just get a new one

https://www.rockauto.com/en/catalog...on,vapor+canister+purge+valve+/+solenoid,4936

 

[BlueCollarTahoe]

Nah its the hose/clamp on thing that snaps onto the purge solenoid. I snapped it where the hose connects into the clip on thing that snaps onto of the solenoid

 

[ivin74]

Get a piece of hose and some clamps $10 fix

 

[afpj]

Dang, sorry. That’s What I get for trying to look at pictures with a five-year-old iPhone with a cracked screen

 

[iamdub]

I recently used some plastic epoxy to reattach headlight mounting tabs. The stuff bonded to the plastic and seemed to chemically become a part of it. The headlights are solidly bolted in place.

I'm pretty sure this is what I used:

 

[Danny3737]

Try some Q-Bond