Matahoe
Full Access Member
My 2005 Tahoe LT 4x4 seems possessed. Does anyone know what would cause the vehicle to pull randomly to either side when braking only? I realize that the primary cause is usually a bad caliper but if it randomly pulls to the left or right...what would that be caused by? It's very odd behavior and in 30+ years since working on gm vehicles I have never seen this. It's always been to one side or the other!
All my steering and suspension components are new other than the shocks. The front shocks are used off a esky with 60k. It's been an additional 10k since installing them.
I have noticed my body is starting to lean when turning. Perhaps my rear shocks need replacement? They are Arnott reman'd z55 air shocks installed by previous owner in 2012
Proportioning valve is front to back and not left to right. Same basic principle for the master cylinder. The only thing that I can think of is bad front shocks. But if I can feel it in the steering wheel pull as well...it must be brake related.Correct?
Thanks for any help. I am prepared to buy another set of Arnotts just because I think it's time. They may solve the issue but I hate throwing parts at a problem and hoping for a change. I need this solved asap as this seems like a safety issue.
All my steering and suspension components are new other than the shocks. The front shocks are used off a esky with 60k. It's been an additional 10k since installing them.
I have noticed my body is starting to lean when turning. Perhaps my rear shocks need replacement? They are Arnott reman'd z55 air shocks installed by previous owner in 2012
Proportioning valve is front to back and not left to right. Same basic principle for the master cylinder. The only thing that I can think of is bad front shocks. But if I can feel it in the steering wheel pull as well...it must be brake related.Correct?
Thanks for any help. I am prepared to buy another set of Arnotts just because I think it's time. They may solve the issue but I hate throwing parts at a problem and hoping for a change. I need this solved asap as this seems like a safety issue.
Last edited: