What did you do to your NBS GMT800 Tahoe/Yukon Today?

[95escahoe]

Get any footwell lights?

I thought about it but don’t really need them the interior LED’s are so darn bright


Sent from my iPhone using Tapatalk

 

[HiHoeSilver]

PowerTrainProducts

Not familiar with the case saver bit

Case saver is a thing that keeps the pump from rubbing its way through the case as has been commonly noted as a known issue.

 

[Rocket Man]

So....installed a new steering cooler and as another member said, watch those cheap clamps that come with it. It was leaking at the cooler to rubber line connection. I found out that when I checked it with a screwdriver it was bound up on the screw drive of the clamp just before it was really tight. Very small leak. Had to use a ratchet and got it to tighten up. No more issues but I did have to take the grill and headlight out again to find and fix it.

View attachment 210436 View attachment 210437

I hate those clamps. I’m thinking I want to look for spring clamps like factory to use on my trans cooler, or go with AN fittings. I bought the special spring clamp pliers awhile back which make removing/ installing them easy.

 

[SnowDrifter]

Case saver is a thing that keeps the pump from rubbing its way through the case as has been commonly noted as a known issue.

Front differential, not transfer case

 

[inmypassatlife]

I was rear ended today, 40mph by a dodge ram. Happy I kept my bumper and tow hitch instead of run a rollpan, for this exact reason.

Small dent on lower rear quarter from the bumper. May take it for estimates and pocket the cash. Fix the bumper brackets and call it a day

 

[HiHoeSilver]

Front differential, not transfer case

Oh yeah.

 

[SnowDrifter]

I was rear ended today, 40mph by a dodge ram. Happy I kept my bumper and tow hitch instead of run a rollpan, for this exact reason.

Small dent on lower rear quarter from the bumper. May take it for estimates and pocket the cash. Fix the bumper brackets and call it a day

Make sure you get your alignment checked too. It takes surprisingly little to tweak the stuff out

 

[inmypassatlife]

Make sure you get your alignment checked too. It takes surprisingly little to tweak the stuff out

That's definitely on my list, felt the truck pulling to one side afterwards

 

[00chevyHd]

I got a set of smoked headlights last year with a set of HIDs i guess they would get way too hot that started to fry the lenses so i got a new set of housings hopefully i dont have that problem with LED

 

[eand28]

I got a set of smoked headlights last year with a set of HIDs i guess they would get way too hot that started to fry the lenses so i got a new set of housings hopefully i dont have that problem with LED

View attachment 210492 View attachment 210493 View attachment 210495 View attachment 210496

Where’d you get the clear housings? Decent quality?