What did you do to your NBS GMT800 Tahoe/Yukon Today?

[ArcticYukon]

Here is the thread where I described how I did it.

https://www.tahoeyukonforum.com/threads/center-console-shifter.89232/#post-1066560

Happy to answer any other questions about it.

Much appreciated, man. Checking it out now.

 

[Grind]

@Grind, who makes the interface?

https://www.crutchfield.com/p_541RP5GM11/PAC-RP5-GM11-Wiring-Interface.html

 

[915_Tahoe]

What year is your Hoe? My 03 didn't come with them, got some and they're plug n play--except for the powerfold part. Plugs plug right into the master window switch on the driver side.View attachment 221215

2001 LT

 

[Tonyrodz]

Sorry, I'm not sure with the 01-02's, but U'd think they would be the same deal. Look under your master switch for the plug ports.

 

[eand28]

Iirc 00-02 never had the turn signals in the mirrors and only the 02 escalades had power fold mirrors with the controls where the 4wd buttons would be

 

[915_Tahoe]

anyone here attempt to adapt these to work. like i said i'm more interested in just the turn signals, might just have to start cutting wires and see what is what and what goes where.

 

[Tonyrodz]

anyone here attempt to adapt these to work. like i said i'm more interested in just the turn signals, might just have to start cutting wires and see what is what and what goes where.

I know 02's had powerfold. There's a yt vid where someone used the dl3's in their--maybe 01-02 truck. I'll try to look for it later. They used a toggle switch to powerfold, and spliced wires for the signals.

 

[Tonyrodz]

I know 02's had powerfold. There's a yt vid where someone used the dl3's in their--maybe 01-02 truck. I'll try to look for it later. They used a toggle switch to powerfold, and spliced wires for the signals.

@Sam Harris didn't you find that vid too?

 

[Sam Harris]

@Sam Harris didn't you find that vid too?

Yeah, I may have sent it to you via email. Don’t recall. Actually, I remember a link to another forum I found where he adapted them to his non-folding Tahoe/ Yukon. Let me see if I can find it again.

 

[Sam Harris]

There was this one:

@Tonyrodz, this may help identify the needed power/ ground wires for the motors. I think that’s the only thing missing. Not saying you need to wire in a switch, but can use this to identify, apply power to the leads, reverse polarity, etc... hope it helps:
https://www.gmfullsize.com/threads/powerfold-signal-mirrors.200970/

I think that’s the thread you were talking about. Have to have a login for that forum. Otherwise, you can fwd the email I sent you with all the good parts extracted. [emoji16][emoji106]