The 18" OE wheels are probably 24mm offset, if they're the 8.5 inch width.
What did you do to your NBS GMT800 Tahoe/Yukon Today?
- Thread starter vwbeaner
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
The 18" OE wheels are probably 24mm offset, if they're the 8.5 inch width.
HiHoeSilver
Away!
Good call. That does sound right.
AlejandroDinero
Full Access Member
Swapped out Headunit’S
HiHoeSilver
Away!
Wait... what?! Not gonna get away without deets on this.
SRQYukon
Full Access Member
Don't do the torsion keys if your dropping it. Ride will be ruined. By the way, looks like your ordering for a 4x4 and I thought you said it was 2wd.
AlejandroDinero
Full Access Member
HiHoeSilver
Away!
Make, model, install details. Daylight pics.
AlejandroDinero
Full Access Member
Bizine-10.1 inch screen 2GB Ram 16GB Rom. it isn’t like a normal double din at all. The only thing needed was the brackets from the factory and wiring harness’s. With the brackets you have to install them as you were pushing the unit away from the dash to clear the bezel with the screen. Basically modify them as you see fit for your installation. It is OBD2 capable so I ordered a mini Bluetooth OBD2 scanner to get live diagnostics through the unit. But for some reason it isn’t turning on in my Tahoe, I tried it in my wife’s X5 and it works so i don’t know what’s up with that. But I’m a big you get what you pay for believer to the max! After reading reviews and everything I decided to give it a shot since my Pioneer AVIC-X920BT isn’t doing it like I thought it would for me.
HiHoeSilver
Away!
Cool. Check your cig lighter fuse. The OBD port is on that circuit.
AlejandroDinero
Full Access Member
Appreciate it, I just read that and I know for a fact it’s blow so I’ll change it out in the morning while I’m installing a full set of husky liners from front all the way to the back lift gate
Similar threads
