What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[CaptainAmerica1]

Z71 springs and rear sway bar end links.
Plugs and wires too.

 

[osiris94ej]

Yesterday i installed the front struts wrong.

Today I fixed that.

Sent from my SM-N950U using Tapatalk

 

[trailblazer]

they must have changed the design on my 2012 the bottom hinge does not appear to be easily serviceable, the hinge would need to be replaced or removed and some parts punched out the fulcrum bolt is pressed in and has a mushroom head

I believe the entire GMT900 series you need to buy the entire assembly. I had to do this on my ‘08 2500HD. IIRC it was about $75 for the bottom spring one. They all go bad on these GMT900’s unless you’re aggressive with the lube.

 

[CaptainAmerica1]

Yesterday i installed the front struts wrong.

Today I fixed that.

Sent from my SM-N950U using Tapatalk

How did you install them wrong?

 

[08grey]

I’d definitely go OEM, unless this seems like a 5-minute job, then go for the Dorman part. [emoji16][emoji106]

I just did this with the 12$ ebay one from China. Works fine.

Sent from my SM-G973U1 using Tapatalk

 

[Tonyrodz]

I just did this with the 12$ ebay one from China. Works fine.

Sent from my SM-G973U1 using Tapatalk

Probably last 6 months.

 

[osiris94ej]

How did you install them wrong?

Had too many ring's under the lower perch. Had them set for stock height. Misunderstanding of the instructions.

Sent from my SM-N950U using Tapatalk

 

[5strmtrp]

Yesterday i installed the front struts wrong.

Today I fixed that.

Sent from my SM-N950U using Tapatalk

I’m assuming right on the left side, left on the right side?

 

[osiris94ej]

I’m assuming right on the left side, left on the right side?

Instructions were unclear. Got dick stuck in ceiling fan.

I stacked the rings up from 3" of max drop. The chart confused me. Had to take them to work and take apart again and take the rings out.

Sent from my SM-N950U using Tapatalk

 

[PPV12HOE]

Well I can't complain about this....