brotten
Member
I'm in the process of sorting out my 05 4x4 hoe after the 3/4 drop and I'm concerned about the clearance from the axle to tailpipe. What Are you guys doing? I don't really want to dump the tailpipe since this is the wives DD.
What to do with exhaust on a 3/4 drop
- Thread starter brotten
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
When I had my flowmaster put on I had the exhaust shop cut the hangers and moved my pipe up as much as they could and re weld. So far haven't had any problems and looks great with my chrome tip
Mister H12
Undercover Racecar
You can run the exhaust after the muffler close to the body away from the axle, then come back down after the axle to do your tip. Mid way through the exhaust system it's cooled down enough it won't cause problems being 2" or so next to the body. Any good exhaust shop will have a good idea of what to do.
Similar threads
