Wheel spacing thread...

[ctlaw74]

Hello,

I am looking for input on the specs required to properly space my rims on the following setup.

2007 Yukon SLT
Bushwacker Pocket Fender Flares.
Factory 17" rims

I want to push the rims out and adjust for the factory track diffences vetween front and rear. My understanding is the front is 1/4" wider on each side in the front than the rear.

I would also like to avoid trimming the wheel studs. Does anyone know the minimum depth of the studs?

Thanks in advance.

 

[HiHoeSilver]

Hello,

I am looking for input on the specs required to properly space my rims on the following setup.

2007 Yukon SLT
Bushwacker Pocket Fender Flares.
Factory 17" rims

I want to push the rims out and adjust for the factory track diffences vetween front and rear. My understanding is the front is 1/4" wider on each side in the front than the rear.

I would also like to avoid trimming the wheel studs. Does anyone know the minimum depth of the studs?

Thanks in advance.

It has been stated that 1.75" is the smallest without trimming. Recently, we have seen 1.5" work if the wheels have divots in the back for the studs to sink into. Each wheel may be a little different on depth.