5/7 drop bishes
- Thread starter Max
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
- Joined
- Jun 9, 2009
- Posts
- 8,744
- Reaction score
- 608
that i dont but if you jack up your truck and when tires come off the ground see if there is a little play in the springs. if it moves a little thats pretty much close to the ext. length prob another 1/2 inch longer than that meaurement
McGaughy -5" spring is 11.75" tall.
- Joined
- Jun 9, 2009
- Posts
- 8,744
- Reaction score
- 608
im going to pull the trailblazer spring and give it a shot. i just need to measure a trailblazer at the 4 inch drop over stock and see what is measures from top to bottom when installed. cause it will pretty much be the same on a tahoe maybe 1/2 to 3/4 lower due to weight.
G-NOTE
Member
Here is the link for 8/500 ....
http://www.summitracing.com/parts/EIB-08002500500/
So has anybody confirmed these will work on the yukon/tahoe/suburban ????
Maybe I should go with 8/600 or 8/700 for the burb ????
http://www.summitracing.com/parts/EIB-08002500500/
So has anybody confirmed these will work on the yukon/tahoe/suburban ????
Maybe I should go with 8/600 or 8/700 for the burb ????
- Joined
- Jun 9, 2009
- Posts
- 8,744
- Reaction score
- 608
djm 4 inch rear drop spring for a trailblazer will lower the tahoe 6.5 inches in rear.
I will be having a djm rear spring here on thursday this week i can take full measurements on so at least at no load you can see how tall it would be.
I will be having a djm rear spring here on thursday this week i can take full measurements on so at least at no load you can see how tall it would be.
