Recent content by Coolman1987us

  1. Coolman1987us

    Problem going backwards

    Check make sure your brake calipers are all bolted in. I've seen calipers lose a bolt and wedge into the rim but only in one direction.
  2. Coolman1987us

    Upgrade package - exhaust/suspension/wheels

    The mpvi3 from HP tuners is $400. The license for my 08 hoe was $100 (different for each generation). I not only shut off AFM but can modify hundreds of other settings for less than this waste of money.
  3. Coolman1987us

    Problem going backwards

    4 wheel drive or 2? Sounds like something in the rear end or maybe in the transfer case if it's 4wd
  4. Coolman1987us

    Probably need new O2 sensors?

    Thanks for the part numbers, saves me some digging. I have heard before to only use OEM, should I get them from the dealer or are the OEM Delco ones on rock auto ok?
  5. Coolman1987us

    Probably need new O2 sensors?

    I have a clamp on the passenger side but I gave up on the driver side, couldn't fit my hands between the firewall. Debating whether or not I want to tackle manifold bolts this weekend. New arp bolts and fel pro gaskets should be here tomorrow. Gonna order some o2's for next weekend.
  6. Coolman1987us

    Probably need new O2 sensors?

    Threw these codes yesterday 5 minutes or so after a cold start. I have a manifold leak so I'm guessing the sensors are probably on their way since it's been running rich. Don't mind the body control code. Working on the oil pressure code, new pickup tube o-ring going in this weekend.
  7. Coolman1987us

    Interior lights not coming on with opening door

    So if we're on the same page.... 1) You open a door and all the dome lights come on. While the door is open and the lights are on, you push one of the buttons for the map lights on the overhead console and that one map light goes off. 2) While the door is shut and you're sitting in the seat...
  8. Coolman1987us

    DOD / AFM delete parts

    @BlackBearPerf What if I already have an mpvi3 from HP tuners. Can you guys work with that or do I need the autocal hardware?
  9. Coolman1987us

    4L60 Types and Differences

    Thanks for the information. The transmission in the Tahoe now is still behaving good I just want to swap in a working transmission when this one goes. I'd rather not have to leave the truck on the lift while I rebuild it's trans.
  10. Coolman1987us

    4L60 Types and Differences

    I'm looking to rebuild a 4l60 for my 08 tahoe and i was wondering what the differences are between all the different years. I have two that were behind a 97 and a 98 both 305's, i know the bellhousing is different. I'm just curious how different they are and if i could rebuild and older one with...
  11. Coolman1987us

    About to install "rebuilt" 4L60E

    Do you know of a list that compares them all? I have a 97 and 98 4l60e and was wondering if I could rebuild one with 2008 parts to swap into my 08 Tahoe. I'm assuming the bell housing will be different, the older trans were behind 305's. May just be easier to find an 08 trans used and rebuild that?
  12. Coolman1987us

    Ford Expedition build thread.

    Yup I'm a dummy. I was in 07-13 Tahoe and for some reason landed on this post. Disregard me.
  13. Coolman1987us

    Oil leak. Not rear main

    The Amazon link in the same post? It brings up the ict one with no hole.
  14. Coolman1987us

    Oil leak. Not rear main

    You still have the link to the one with the hole? I want to add another pressure gauge.
  15. Coolman1987us

    Ford Expedition build thread.

    Although extremely sceptical, I commend your effort. You know this is a forum for GM though right? Specifically Tahoe and Yukon.
See more

Forum statistics

Threads
129,419
Posts
1,815,739
Members
92,618
Latest member
SWoolf777

Latest posts

Top