-
-
I've seen seized caliper pins caused squeaking since the caliper won't release smoothly. I'm thinking it might be the parking brake shoe... -
rezapci reacted to Fless's post in the thread Changed entire evap system, but can't blow out line from engine bay with
Like.
There are many places that the evap system can leak. Although smoke tests aren't always conclusive, one helped me find a leaking fuel... -
rezapci reacted to Bama704's post in the thread Changed entire evap system, but can't blow out line from engine bay with Like.
I changed lines and still have the check engine light on. Also have the tighten gas cap message after replacing with new cap.
-
rezapci reacted to 91RS's post in the thread Changed entire evap system, but can't blow out line from engine bay with Like.
I was able to unclog the line on the tank by squeezing it all over with pliers to break up the charcoal and it finally blew out, 150 PSI...
-
rezapci reacted to 91RS's post in the thread Changed entire evap system, but can't blow out line from engine bay with Like.
HThis is my 08. I was getting tighten gas cap and couldn’t fill with fuel. Replaced the canister, vent valve, and thought I had the...
-
rezapci reacted to mountie's post in the thread Changed entire evap system, but can't blow out line from engine bay with Like.
I had everything replaced on my '05 Yukon a little over a year ago.... But.. I still get that " Tighten Fuel Cap" warning. I replaced...
-
rezapci reacted to George B's post in the thread Changed entire evap system, but can't blow out line from engine bay with Like.
Just thinking but… now about using a shop vac connected to the line to suck the pellets out?
-
Quite possibly. I forgot to mention, but I have gotten the "TIGHTEN GAS CAP" message a couple times lately. Since it's very...
-
A few weeks ago, I suddenly started having issues when filling the gas tank. I had to hold the handle just enough to let it barely...
-
rezapci reacted to 91RS's post in the thread Changed entire evap system, but can't blow out line from engine bay with Like.
If the canister came apart on the vent side you’re also going to need to drop the tank and clean out all the pipes on top of the tank...
-
rezapci reacted to iamdub's post in the thread Changed entire evap system, but can't blow out line from engine bay with Like.
I used a standard blow gun with a rubber cone tip- the type that comes with most any air tool variety pack. My compressor is a...
-
rezapci reacted to blueinkd's post in the thread Changed entire evap system, but can't blow out line from engine bay with Like.
Cool. Sounds like you had it under control. Just checking. I'm surprised how the line clogged up like that. Mine had charcoal pellets in...
-
rezapci reacted to Fless's post in the thread Changed entire evap system, but can't blow out line from engine bay with Like.
And it can be difficult to get a sealed connection on the purge valve hose connector for the air compressor tip. I've used a short...
-
I just wanted to update everyone on this. I finally got it to a different mechanic and he blew out all of the lines and that fixed the...
-
I would maybe get a second opinion. It sounds like you either have a purge valve stuck closed, or the charcoal canister took a dump and...
-
-
Loading…
-
Loading…
