DenaliRider4
TYF Newbie
- Joined
- Feb 2, 2024
- Posts
- 3
- Reaction score
- 0
2018 GMC Yukon Denali 2wd
No Codes or service suspension system message
After towing a boat one time the yukon has been riding rough. Replaced the front struts and rear air ride shocks thinking this was the problem since it has 110k miles i know they dont last forever. Still riding rough. Tested my compressor by putting weight in the back on the yukon and it pumped it like it was suppose to. Took the weight out and it did relieve the pressure and dropped back down to normal ride height slowly. *Side note* the compressor does not cut on every time during start up. but the bags are firm so im guessing its not needed to cut on unless called upon to. What should be my next step? Get a tech 2 type scan tool and look at the live data for suspension parts? Thanks guys!
No Codes or service suspension system message
After towing a boat one time the yukon has been riding rough. Replaced the front struts and rear air ride shocks thinking this was the problem since it has 110k miles i know they dont last forever. Still riding rough. Tested my compressor by putting weight in the back on the yukon and it pumped it like it was suppose to. Took the weight out and it did relieve the pressure and dropped back down to normal ride height slowly. *Side note* the compressor does not cut on every time during start up. but the bags are firm so im guessing its not needed to cut on unless called upon to. What should be my next step? Get a tech 2 type scan tool and look at the live data for suspension parts? Thanks guys!
Last edited: