DaveO9
Latest activity Postings About
-
-
DaveO9 replied to the thread hum or howl in 4wd.I was looking more closely at the oil I drained out the other night. There is tons of metal in there, but it is super fine, zero flakes... -
DaveO9 replied to the thread hum or howl in 4wd.I haven't asked yet. I'll ask or maybe just submit the receipt, but even if they don't, it'll be better than paying the $400 for a...
-
DaveO9 replied to the thread hum or howl in 4wd.I might be getting a break - I called LKQ Online today and put in a warranty claim. Still some hoops to jump through, i.e. got to take...
-
That stinks, but eBay is your friend.
-
DaveO9 replied to the thread hum or howl in 4wd.Drained the fluid today - front diff is cooked. Tons of sparkles, oil is completely silver. Time to go shopping. Going to get another...
-
This is a weird one, my speedo is suddenly reading high. Or at a minimum, I suddenly noticed it. About 14% or so. It'll be reading...
-
DaveO9 replied to the thread hum or howl in 4wd.yeah, that's pretty much what it sounds like. Maybe a little lower pitch and not quite as pronounced, but pretty close.
-
DaveO9 replied to the thread hum or howl in 4wd.New Delco hub assemblies installed. No dice - noise unchanged. It has to be coming from the front diff. I will probably let it ride...
-
DaveO9 replied to the thread hum or howl in 4wd.Ordered 2 AC Delco Gold hub assemblies, should be here on Wed. We'll see if that helps.
-
DaveO9 replied to the thread hum or howl in 4wd.I had my wife drive it tonight so I could sit in front pass seat and rear seat to listen. Still don't have it nailed down, but I think...
-
I would have been fine with the noise in my front diff, but it was getting worse and worse, and the fluid was clearly full of bearing...
-
this has been a historical issue on the gmt800's some of the front diff''s are just noisy period.. I experienced the same (noise in 4wd)...
-
Here is the link to my adventure with this same front diff issue...
-
My Z71 was making a humming noise only in 4 wheel drive mode turned out to be the front wheel bearings. After I installed new bearings...
-
Yeah, the C/Vs were in place. I don't remember anything specific that I did to help it fit in, but I'm sure wedged or tied it as far up...
-
-
Loading…
-
Loading…
