OR VietVet
Latest activity Postings About
-
-
Great! I will have to give that a try. I have silgylde. -
best thing to do is unbolt the D bushings and slop some grease in there, you will want to do this seasonally and it might still squeak...
-
OR VietVet replied to the thread Oil Cooler Blocking Plate.I am getting ready to do the oil cooler and the transmission cooler lines on my 2004 K2500HD 6.0. I already plan to drop the lower...
-
I just had my oil cooler lines replaced on my 2006 LQ4 6.0. I brought the new lines in($143ish in parts price from autozone) since I...
-
^^^ THIS. Easy job once the front propshaft is disconnected right below the blocking plate. Are you sure they weren't quoting a new...
-
no not at all. I've had mine off about 3 times. at most you might need to lower one end of the front drive shaft if you don't have the...
-
Asked dealer to locate oil leak on my 2007 Chevy Tahoe (4WD) today. Came back with the oil cooler blocking plate. To repair they’d have...
-
OR VietVet replied to the thread Speed bump squeak.The same here when I did the Hellwig bars.
-
I used Sil-glyde on mine when I replaced the bushings and end links.
-
They are cheap.. If they look crappy, just replace them. Just use OE replacements from local parts store (can use store brand no issues)
-
no zirk and spray on the outside probably won't get in where it needs it. I unbolted mine and greased all the bushinga by hand. it's a...
-
Spray grease or are there zirks?
-
on mine I did the end links and the sway bar center links with some good grease used on poly bushings and it went away. it is back...
-
Thanks for the advice I will try spraying the sway bar stuff first and see if that works!
-
I would guess sway bar end links.. They are pretty throw away parts and fairly cheap and easy to replace.. Just take a look at them visually
-
-
Loading…
-
Loading…
