-
-
Nice pics to tell the whole story. It’s just an internet diagnosis, but going to the cheapest, easiest first methodology, consider an... -
tom3 replied to the thread Sticky caliper ?.Those slide pins can sure rust up and cause several problems. Hard to get them out too, parts loosener, heat, lots of patience.
-
I'm sure all the engine replacements isn't helping any of this
-
While DEX6 running that hot may be fine for the fluid, I have shifting issues when I get that hot. Just stacking a cooler on it to hold...
-
GMT900s (up to 2014) with the 6L80 don't have the stupid thermostat in the transmission cooler lines. It was added in the 2015s and up...
-
tom3 replied to the thread On a 2019 GMC Yukon xl denali 6.2 10 speed Transmission - Does it sound correct that GM recommends a Drain and Fill and not a "Flush"?.Doing my 6L trans. every 30k miles or so and I do drop the pan, new filter and 5+ quarts of fluid. I want to see what's in the bottom...
-
tom3 replied to the thread Extended Warranty going up 4/7 30%.That's a chunk of change there too. I wonder if that's a result of the new tariffs since most replacement parts are imported.
-
tom3 replied to the thread 6L80 Heat Related Symptoms.If I were in Texas I'd put an aux. cooler on the return line, and a good sized one. and do away with that thermo valve on the trans...
-
I agree, the JL was the best one and super easy install. Fittings were positive and thats the third thing I did to my new Yukon (1st and...
-
tom3 reacted to Staceyr72's post in the thread Transmission valve body-no parts to be found with
Like.
I'm so curious to how many 2021 Tahoes are having this issue? I have a high country, 2021, my dealership has had it for over 2 months...
-
-
Loading…
-
Loading…
Forum statistics
Latest posts
-
-
Any Experiences with The LuK TorCon TC0017 Torque Converter?- Latest: Scrappycrow
-
-
Surging, bucking hesitation, cold ,throttle just off idle under 25 mph
- Latest: blanchard7684
