blondie70's latest activity
-
Bblondie70 reacted to TrybalRage's post in the thread Anyone try to program modules lately? - SOLVED with
Like.
I haven't been able to update ANY modules. Same error. The driver's door module contains all of the switches for the windows, mirrors... -
Bblondie70 reacted to TrybalRage's post in the thread Anyone try to program modules lately? - SOLVED with Like.
Still no luck. Same exact behavior. I connect to the truck with the new OBDX Pro GT, it can see the controllers, allows me to choose...
-
Bblondie70 reacted to Fless's post in the thread 1997 Tahoe LS Swap - No Speedo, ABS Light on, 4wd blinks with Like.
Tip: if you want to tag someone, either "reply" to that member's post (like I did here with yours) or 'tag' him using the "@" symbol and...
-
Bblondie70 reacted to Dustin Jackson's post in the thread Is there a Transmission Temp Display on my 2008 Tahoe Z-71?? with Like.
It sounds like the top button isn't working for you. I have an 08 Z71 Tahoe and the top button lets you cycle through the odometer, trip...
-
Bits on the block, not the pan. Hope the leak is fixed :waytogo:
-
BWe were noticing a fuel smell at start up intermittently. I found TSB's for the fuel feed line leaking above the tank, so I replaced...
-
BThat could happen with any filter.. If you look at the innards of a Delco filter and you look at the innards of a WIX... You'll see why...
-
Bblondie70 reacted to Marky Dissod's post in the thread Cylinder head recommendation for 5.3 with Like.
All the above advice is sound. Specifically, I would rather spend money improving the heads you already have Since you posted in the...
-
B^^^^^^^^^^^ This, a S/C AND not increase your compression ratio... if a bore/stroke or 6.0L (up to 408 ) is not in the cards, gearing is...
-
BThat's a good point! I had some stock 317 heads checked, cleaned and remachined by my local machine shop a few months ago. These were...
-
Bblondie70 reacted to swathdiver's post in the thread Cylinder head recommendation for 5.3 with Like.
Yep, what he said! ^^^^ Overhaul the heads, increase the compression by shaving them, using thinner head gaskets, etc. Maybe some...
-
BThose ARE the preferred heads that increase the compression slightly. The factory LS heads flow better than anything else out there for...
-
BPATC in louisiana makes good converters too... The "stock" core one has a beefed up clutch and you can also order whatever stall speed...
-
Bblondie70 reacted to Geotrash's post in the thread Replacing torque converter - with what? with Like.
It's second hand info, but the transmission shop told me he uses the same model BU60FHD in both the 6L80 and 6L90, and it was listed as...
