donjetman's latest activity
-
It could be made to work but an LS3 isn't really the best powerband for a big heavy truck. The VVT makes a huge difference for power... -
Just an update. I took the family of 7 (it was tight!) down to the OBX for 2 weeks (first 2 week vacation ever!) in the Yukon and it...
-
donjetman reacted to Geotrash's post in the thread 09 Yukon 6L80 TC shudder every 20k miles with
Like.
The CC clicking off is usually caused by a faulty brake pedal position switch. I had that problem on my '07 and a new switch solved the... -
donjetman reacted to NickTransmissions's post in the thread 09 Yukon 6L80 TC shudder every 20k miles with Like.
Yep, for sure...I always recommend a good electronic tune to coincide with my rebuilds and agree; not sure why GM tunes these units the...
-
donjetman reacted to DaveO9's post in the thread Melted mega fuse holder near positive battery post with Like.
yeah seems like there is a lot of variation year to year on those cables. I found the one you posted on RA under my year, 2013, and it...
-
donjetman reacted to Coolman1987us's post in the thread 09 Yukon 6L80 TC shudder every 20k miles with Like.
I just watched a video on youtube from Matt Sanford about tuning the 6l80 stock trans and followed his steps, its like a whole new...
-
donjetman reacted to skpyle's post in the thread 2021 PPV Front Brakes on 2013 Escalade ESV, and rear brake overhaul with Like.
I was able to remove the PowerStop hoses and install the new GM Genuine hoses without much trouble. I had to swap over the ball studs...
-
donjetman reacted to solli5pack's post in the thread Melted mega fuse holder near positive battery post with Like.
Just make sure you order the correct one for you year. GM used multiple different designs, my 08 Yukon and 10 Suburban have two...
-
donjetman replied to the thread What is this plate on my oil pan???.@paulwaul1369 Those pieces look like a lifter "roller" and needle bearings.
-
donjetman reacted to NickTransmissions's post in the thread 09 Yukon 6L80 TC shudder every 20k miles with Like.
10 is the standard, 60 is a bit high but I think codes start setting at 80 or 100 RPM slip for two consecutive drive cycles...I take my...
-
donjetman reacted to Doubeleive's post in the thread P0171 and P0174 - Stabilitrak...only under certain conditions. with Like.
bank1 is drivers side, bank2 is passenger side bank 1 sensor 1 is the sensor before the cat, bank 1 sensor 2 is after the cat and so on...
-
donjetman reacted to Jimxms's post in the thread P0171 and P0174 - Stabilitrak...only under certain conditions. with Like.
So I just smoke tested the intake etc and the only thing that showed any sign of leaking was the oil filler spout. It wouldn’t sit...
-
man..... that sh*t don't work, especially on something that has been mutated from hot/cold over years and years and years just cut the...
-
I tried 3 different tools to remove those Tees, and all were not successful. As such, I cut them off. I did not try, however, the...
-
H3 I stand corrected oe p/n: 25847739 works left or right side
