donjetman's latest activity
-
I definitely considered setting it a blaze a time or 2.. but I also needed to get to work so had to keep at it! Appreciate it! -
should just be a few mA of current to close the relay contacts. the starter solenoid is grounded thru the block. the wire will be fine...
-
Alright so.. my jumper wire worked. It cranked. Thank you Lord!
-
Since the starter relay and the run/crank relay share the same N5 ground on the bottom of the board and the run/crank N5 seems to have...
-
you might not think you're a mechanic but this is better trouble shooting than most mechanics can do these days. definitely add a...
-
That sure is odd. That circuit board doesnt appear to be a multilayer circuit board. So just the traces on the top there in the pic...
-
Alright so after some more diagnosis this evening, I had my buddy hook up his $7000 scanner and scanned the entire vehicle. The Theft...
-
Possibly, but I don't know for sure. You can get a cheap transmission jack from horrible freight that will let you drop the thing out so...
-
donjetman reacted to Geotrash's post in the thread Intermittent starting issue 2011 Yukon XL Denali with
Like.
Keep the Z95 suspension. Replacement GM or Arnott rear air ride and front mag ride shocks are relatively inexpensive on rock auto... -
donjetman replied to the thread Possible front diff failure?.@Discodisco use the search fuction here, "Clunk" & "KlunK", this has been discussed a lot here.
-
donjetman replied to the thread OK, Bought a 07 with a couple problems today..@SpareParts 15 psi is not low the VVT system is not problematic my 07 6.2L did/does not have a screen under the sender.
-
I just replaced a broken valve spring on my 2013 Denali. Had it towed to a local shop that said they did diagnostics on it and gave me...
-
donjetman replied to the thread 2007 denali oil pressure questions. *video posted*.your oil pressure is fine
-
donjetman reacted to j91z28d1's post in the thread 08 Tahoe - Retapping O2 Sensor Threads with Like.
they sell o2 sensor tap. I've got one I use just to clean up threads after welding a bung in. of that doesn't work, a new exhaust...
-
Wrong order, parts cannon method. And we should use the correct terminology to minimize confusion. First test the VENT (not purge...
