donjetman's latest activity
-
donjetman reacted to Doubeleive's post in the thread Rattling Sound From Rear and Highway Vibration with
Wow.
ya these are not the old school type, they have to be melted out. probably easiest to pull the drive shaft and check them with the shaft... -
donjetman replied to the thread Intermittent oil pressure loss.here is a GM Technical Service Bulletin (TSB) that applies to your vehicle. Has it been done...
-
So I drove home from work and after about 15 mins of driving, the pressure started to get down about 10psi. So I revved it to 3000-3500...
-
donjetman replied to the thread DOD delete but keep VVT?.So you have determined its an early L92? with smooth VLOM, etc. Only the early production L92's had AFM hardware, built prior to April...
-
Yes, this. You’ll want the height of the jack stands as well as the stability. The wheel ramps are safer but don’t give the height you...
-
@77mercury77 You can jack from the bottom of the pumpkin to place the jackstands. My floor jack has a rubber pad on top and the diff...
-
.... A little bit of maintenance does wonders
-
Dropped the pan and changed filter after work today and surprisingly, it seems to have worked. Magnet was “furry” and there was a liitle...
-
i've been there... call around your local junkyards a typical used 4l60 can be found for about $650, then you have a core charge, fluid...
-
donjetman reacted to NickTransmissions's post in the thread Transmission has turned Christine with Like.
Contact your local GM dealership tomorrow and ask for the Parts dept...give the parts guy the last 8 digits of your VIN and ask him if...
-
donjetman reacted to NickTransmissions's post in the thread Transmission has turned Christine with Like.
You left out the most important detail, lol. I would have never typed out my previous post if I had known that. Instead it would have...
-
donjetman reacted to NickTransmissions's post in the thread Transmission has turned Christine with Like.
I had a customer whose cooler line popped out about 100 miles after he reinstalled the transmission I had built for him. It happened...
-
donjetman reacted to NickTransmissions's post in the thread [SOLVED] Help! No transmission indicator, No Manual gears after transmission swap. with Like.
Either swap your VB-TEHCM-IMS/Harness/SS assembly from your 2009 to the 2007 unit or program the 2007 unit's TEHCM to work with your...
-
donjetman reacted to NickTransmissions's post in the thread [SOLVED] Help! No transmission indicator, No Manual gears after transmission swap. with Like.
No misunderstanding my part but maybe on yours. What I'm telling you to do is remove the TEHCM/VB/SS/IMS assembly (six inverted torx...
-
donjetman reacted to rdezs's post in the thread Rattling Sound From Rear and Highway Vibration with Like.
I recently did the u-joints in my wife's 2014 Escalade when it had around 162,000 miles, just as a preventative maintenance thing. Each...
