Dustin Jackson's latest activity
-
Should be fine. -
A few years ago I bought a grease gun and a tube of grease that’s have been sitting for a while. Any problem using it to grease up new...
-
Dustin Jackson replied to the thread Tire size no rubbing leveled 13 suburban (pics attached).@KevOLTZ I ended up going with 275/60/r20 KO2s, they come out to 33 inch x 10.5 so not super wide
-
Dustin Jackson reacted to KevOLTZ's post in the thread Tire size no rubbing leveled 13 suburban (pics attached) with
Like.
I took some notes from your build and went with the moog springs and she came out nice by the way so props to you good sir. I’m hoping... -
Dustin Jackson replied to the thread Replaced engine, now no crank no start.Check the negative battery cable that goes to the front of the passenger side head. If that isn't tighten down well it will cause this
-
Dustin Jackson replied to the thread Tire size no rubbing leveled 13 suburban (pics attached).You'll only rub on the suspension if you change the wheel offset but with a decent amount of trimming and maybe the norcal mod you'll be...
-
Dustin Jackson reacted to Raptor Tahoe's post in the thread Suspension Lift recommendations??? with Like.
Great looking trucks. I agree on the Fabtech lift. I used that lift on my 2007 Tahoe LTZ and have an excellent ride and handling with...
-
Dustin Jackson replied to the thread Lower Ball Joints Recommendation.@Trey Hardy I wanted to go with Kryptonite balljoints but because of a few factors I’m opting to replace the whole arm. Since the Moog...
-
Dustin Jackson reacted to Trey Hardy's post in the thread Lower Ball Joints Recommendation with Like.
My sisters new mevotech sway bar links snapped today it was only a month old I’ve never had experience with them however if your in a...
-
Dustin Jackson replied to the thread Lower Ball Joints Recommendation.@jaywestfall Thank you for you input about the Mevotech. I used their upper TTX arms and I was impressed by the packaging but the matte...
-
Dustin Jackson reacted to jaywestfall's post in the thread Lower Ball Joints Recommendation with Like.
GMT400 lurker here (1998 C1500 ext cab 5.7 4L60e). Replaced entire front suspension with MOOG once and got less than 30,000 out of...
-
Dustin Jackson replied to the thread Lower Ball Joints Recommendation.I did end up buying 2 Mevotech TTX arms last night, going to try and cancel the Kryptonite order it seems they are really behind anyways
-
Dustin Jackson replied to the thread Lower Ball Joints Recommendation.@swathdiver About 40k
-
Dustin Jackson replied to the thread Lower Ball Joints Recommendation.@swathdiver I used the Moog CK control arms, the $120 ones from Rock Auto. Same with the rest of my suspension I used the “good” Moog...
-
Dustin Jackson replied to the thread Lower Ball Joints Recommendation.@Doubeleive I hear you, my current arms are only 3-4 years old so I was going to just try and do the ball joints. Now that I'm thinking...
