Dustin Jackson's latest activity
-
Dustin Jackson replied to the thread non afm camshaft, oil groove or?.@glosol If you are running non-AFM hardware you need to tune the AFM feature out of your computer. You can temporarily plug the old... -
Dustin Jackson replied to the thread rear lift spacers, loose fit?.@mikez71 The metal ones from ebay look nice. I think once you get them in you'll be happy with it. I was going to recommend the Moog...
-
Prefer a tiny bit more rake unloaded, and I anticipate adding some weight in back. (thinking drawers) This photo shows RC 2"? front...
-
I saw those, seems like they only have 1.5". Which who knows maybe what I need, but I figure I'll start at the minimum.. (well I've seen...
-
Dustin Jackson replied to the thread rear lift spacers, loose fit?.@mikez71 Do you have a picture of how it sits? Are you trying to keep it from squatting?
-
Dustin Jackson replied to the thread rear lift spacers, loose fit?.Go with MZS they have aluminum spacers. Here is an example of how mine were installed. Once they are in there you shouldn’t have any...
-
-
Dustin Jackson replied to the thread rear lift spacers, loose fit?.@mikez71 Can you post a link to the spacers? The spacers I used in the past were 2.5 inches thick solid aluminum and they fit pretty...
-
Dustin Jackson replied to the thread Is This Camshaft Reusable? Or Too Pitted?.I imagine the parts of the cam that contact the bearing are even worse.
-
Dustin Jackson replied to the thread Slow Crank When Engine Hot: Replace Battery Cables?.Have you had the battery tested? Here’s the cable at orileys...
-
Dustin Jackson replied to the thread 2009 GMC Yukon Denali 6.2l Oil Pressure Gauge moving Slow-SOLVED.@j91z28d1 I think the one that I bought was from Rock Auto but I've had bad experience with other Ac Delco parts from Amazon also
-
Dustin Jackson replied to the thread 2009 GMC Yukon Denali 6.2l Oil Pressure Gauge moving Slow-SOLVED.When I deleted the AFM I used a new AC Delco Oil pressure sensor as preventative maintenance and the new sensor seems to be less...
-
Dustin Jackson replied to the thread Mevotech TTX update.Working through Mevotech warranty claim currently will update. Might just be bad quality control because the other side is perfect
-
I don't like to see that as I just did a complete front end rebuild of my 2014 PPV with all TTX parts. It is an on-road vehicle only so...
-
Dustin Jackson replied to the thread Dustin Jacksons 2008 Chevy Tahoe Build Thread.Another development is I've been chasing down bad shaking on the freeway above 70mph. I jacked up the tahoe and when I spin the wheels...
-
Dustin Jackson replied to the thread Dustin Jacksons 2008 Chevy Tahoe Build Thread.At about 200,080 miles I replaced the lower control arms after I found one of my Moog balljoint was loose. I went with Mevotech TTX for...
-
