justirv's latest activity
-
JThat's strange. Why did you replace the shifter cable in the first place? Did the truck ever work correctly? Almost sounds like it's...
-
J@jackmono Moved you here from 2021+section. Welcome from Miami&NYC!
-
JYes, well, I'd move the thread if I knew what was being worked on. :confused:
-
JTell us your make, model, year, and engine for starters.
-
Jjustirv reacted to Joseph Garcia's post in the thread Avoid GM Parts Giant if at all Possible with
Like.
I had the same experience with GMPartsGiant.com. They are a dealership trying to have an active online presence in the parts business... -
Jjustirv reacted to OR VietVet's post in the thread Avoid GM Parts Giant if at all Possible with Like.
I can't remember where, but I think I saw a GM Part's Giant warning before, somewhere. I have had good luck with GM Parts Direct
-
Jjustirv reacted to Doubeleive's post in the thread DOT Secretary Rolls Back All Emission Standards with Love.
get rid of CARB and we are golden
-
Jjustirv replied to the thread misfiring on driver side cylinders.Intake manifold gasket shrinkage could be the problem. When the engine warms, expansion helps "re-seal" it... possibly getting...
-
Jjustirv reacted to Scrappycrow's post in the thread Thoughts on greasable upper amd lower control arm bolts? with Like.
To be clear, my comment is about the fineness of adjustment, not the adjustment range. So, "how much" isn't what I was responding...
-
Jjustirv reacted to 89Suburban's post in the thread Thoughts on greasable upper amd lower control arm bolts? with Like.
Just thinking out loud, I could be full of sh*t. Like to hear other's opinions. I know they sell upper control arms with lube fittings...
-
JThe problem with engine modules is they don't know there is a problem often. For example, if you try to start a vehicle with a coolant...
-
JA very cool example of the problem, thank you for sharing. It's important.
-
JVery good point. Coincidentally, our 2015 Impala with the 3.6 V6 developed a very slight flair at times and after some digging, we...
-
JWhere is this shift torque factor setting? And what should it be set to?