KidWgn's latest activity

  • KidWgn
    KidWgn replied to the thread The KidWagon.
    Leave it to me to remember WRONG :anitoof:
  • KidWgn
    KidWgn reacted to kbuskill's post in the thread The KidWagon with Like Like.
    Other way around. Lowering pushes the axle toward the driver side as the panhard bar is mounted to the frame on the passenger side.
  • KidWgn
    KidWgn replied to the thread The KidWagon.
    If I remember right, it shifts the whole rear end to the right (passenger) side, meaning it would be sunken on the driver side.
  • KidWgn
    KidWgn replied to the thread The KidWagon.
    I can't believe your rear end isn't thrown way off, side-to-side.
  • KidWgn
    KidWgn replied to the thread The KidWagon.
    Holy crap. You’re dropped 5 rear with the stock track bar?!
  • KidWgn
    KidWgn replied to the thread The KidWagon.
    Do you have the rear end centered fore-to-aft? I used Spohn adjustable upper and lower control arms to do so.
  • KidWgn
    KidWgn reacted to 89Suburban's post in the thread The KidWagon with Like Like.
    Some here were worried that my actual rear driveline was bottoming out via full collapse of the rear driveshaft slip joint into the rear...
  • KidWgn
    KidWgn replied to the thread The KidWagon.
    I'm not following what you're saying, but I'm also short on sleep and attention span lately. Do you mean the rear axle tube bottoming...
  • KidWgn
    Nope, you have it right. But unless you're talking about a Boeing 737, your hour meter got reset somehow along the way. ;)
  • KidWgn
    KidWgn replied to the thread The KidWagon.
    Oh it does :rotflmao: My fender to hubs are currently: FL: 17.5 FR: 17.5 RL: 17.5 RR:17.625 1/4 tank of fuel
  • KidWgn
    KidWgn replied to the thread The KidWagon.
    Almost done gutting the Subaru in the garage...and then I can finally get the Tayhoe in the garage and so some much needed work. 24's...
  • KidWgn
    KidWgn replied to the thread The KidWagon.
    Can’t remember if I posted a side shot on the 22’s yet.
    • IMG_7716.jpeg
  • KidWgn
    For perspective, rotate diagram 1/4 turn counter clockwise. Pins on the left side (top in pic) 1 starts at the inside top, then 2 inside...
  • KidWgn
    Those are 6 tons in my pic. Needed them for the height and stability.

Forum statistics

Threads
131,646
Posts
1,854,432
Members
95,861
Latest member
Virgorabit

Latest posts

Top