Matthew Jeschke's latest activity
-
Matthew Jeschke replied to the thread Bleeping QD lines to evap / fuel system.Haha thanks! Anybody know where to buy a tool that fits the test port on the evap system (under hood by fuel rail) Also I assume the... -
Matthew Jeschke reacted to Fless's post in the thread Bleeping QD lines to evap / fuel system with
Like.
I wouldn't call it "stupid," just experimenting! -
Matthew Jeschke reacted to Fless's post in the thread Bleeping QD lines to evap / fuel system with Like.
When the ignition is off, the vapors vent from the canister out through the vent valve in the rear. Either the valve isn't opening when...
-
Matthew Jeschke replied to the thread Bleeping QD lines to evap / fuel system.Turns out I'm "stupid". I forgot I rebuilt the purge fitting on canister. When I did that I made it larger so as to be able to glue a...
-
Matthew Jeschke replied to the thread Bleeping QD lines to evap / fuel system.Back to messing with this cheap junk fuel and evap line stuff from GM. Saga continues... I bought a new evap canister. Mine isn't doing...
-
-
Matthew Jeschke replied to the thread Pulling off the Perfect NP246 Transfer Case Rebuild.Material worn of is minimal. Less than even rounding error would be. Unless you have a badly worn transfer case in which case a visual...
-
Matthew Jeschke replied to the thread Factory tow hitch.You may have to remove steering wheel, instrument bezel molding, and knee bulster to get wheel molding off without ripping it. It sounds...
-
Matthew Jeschke reacted to Mudsport96's post in the thread Incorrect fuel pressure Key on and Engine Running with Like.
I haven't whole heatedly looked for an adjustable one. But it seems you are right as I haven't found one that goes on the factory rail...
