nonickatall's latest activity
-
Makes sense now according to attached schematic they are using PCM B fuse also to power the Fuel Pump via the Fuel Pump Relay. Wonder... -
@89Suburban were you the one who used something like the ones that come with 18" of fuel line and a splice? I think these are the ones...
-
nonickatall replied to the thread Truck won't crank.My car is a European model and was delivered directly to Germany. Fortunately, the underbody of my car was protected against corrosion...
-
nonickatall replied to the thread Truck won't crank.Yes, in Germany they use a lot of Salt in the winter..
-
nonickatall replied to the thread Truck won't crank.The pump is out, but now I have the problem that two connections can no longer be removed. Does anyone know if these connections are...
-
-
ugh that's a lot of rust monster....... man I would put some kind of coating on the new one before you slap it back up under the body
-
nonickatall replied to the thread Truck won't crank.I have removed the tank. Looks crazy. Harness seems to be ok... Now I try to open the ring from the fuel pump...
-
-
while you are under there inspect the fuel pump harness where it feeds forward make sure it's not rubbing on the frame or body anywhere...
-
nonickatall replied to the thread Truck won't crank.I guess I have found the problem. I pulled the fuel pump relay and now the fuse stays and the truck cranks... I will swap the fuel...
-
like for instance if a 02 sensor harness was melted on the exhaust or got frayed, etc... you have to careful when giving other vehicles...
-
might want to check all fuses and inspect any related sensors/relays i.e. I think you can rule the pcm it's self out now though since...
-
nonickatall replied to the thread Truck won't crank.I had checked concerning the fuse box. Looks all normal without moisture or green crust...
-
-
nonickatall replied to the thread Truck won't crank.I swapped the PCM from the buddy, but as soon when I switch on ignition the PCM B fuse blows. @rockola1971 I will look on on the...
-
Ok I tracked down some schematics for you 2006 Esky. Igntion E fuse is the feed for the control circuit for your starter RELAY coil...
-
nonickatall replied to the thread Truck won't crank.I talked to my buddy and he will come tomorrow with his PCM, so i can check if the PCM is the problem. Do you think the fuel pump can...
