persistent's latest activity
-
Ppersistent replied to the thread dod delete etc: proper way to get part numbers?.i've got a 40 in breaker with 3/4 drive (largest i could find on amazon) coming today, so i will give that a try once it arrives. even...
-
Ppersistent reacted to Geotrash's post in the thread dod delete etc: proper way to get part numbers? with
Like.
The only tool I have that works on really tight balancer bolts is the top air impact wrench that harbor freight sells. When I had to get... -
Ppersistent reacted to JMH1980's post in the thread dod delete etc: proper way to get part numbers? with Like.
4 foot breaker bar should crack it loose. Then run it out with your impact. That's probably the cheapest option
-
Ppersistent replied to the thread dod delete etc: proper way to get part numbers?.i'm having a real tough time getting this balancer bolt loose. i've got the flywheel holding tool installed, so the crankshaft doesn't...
-
Ppersistent replied to the thread 2020 6.2L: misfires, lifter issues and engine replacement.as a result of these lifter problems, i decided to do a dod delete myself, which would give me an opportunity to observe and clean the...
-
Ppersistent reacted to MD-Wood's post in the thread dod delete etc: proper way to get part numbers? with Like.
I made the rad support and fenders as padded as possible and spent alot of time laying chest down on them through out a DOD/VVT delete...
-
Ppersistent reacted to PPV_2018's post in the thread Is It Worth Replacing High-Mileage Injectors? with Like.
Almost 400k on injectors is a lot. Unless every single aspect of the motor and fuel system has been perfectly maintained, it’s probable...
-
Ppersistent replied to the thread dod delete etc: proper way to get part numbers?.i'm most of the way through the disassembly process at this point, and i've got some notes after following the video. my plan is to note...
-
Ppersistent reacted to Joseph Garcia's post in the thread dod delete etc: proper way to get part numbers? with Like.
I suggest that you call the folks at Texas Speed or Summit Racing. They are very knowledgeable in this area, and with your VIN, they...
-
Ppersistent reacted to Big Mama's post in the thread dod delete etc: proper way to get part numbers? with Like.
Welcome to the forum from Virginia. Lots of places have ready to go kits. If you want to upgrade any parts go to gmpartsdirect and enter...
-
Ppersistent posted the thread dod delete etc: proper way to get part numbers? in Engine & Drivetrain.i'm in the planning stage of doing a dod delete, and i want to replace several other engine components as part of the process, per this...
-
Ppersistent replied to the thread 2020 6.2L: misfires, lifter issues and engine replacement.another round of 1/2 qt seafoam got the lifter unstuck again, and after 400-500 mi without it sticking again, it's throwing CEL again...
-
Ppersistent reacted to B-train's post in the thread 2020 6.2L: misfires, lifter issues and engine replacement with Like.
Yep, keep with the same program. It took many miles to gunk it up, so it's gonna take a bit to clean it out. Longer runs of highway...
-
PFinal Update - I was able to reset the cam gear without having to drop the oil pan. I got the timing aligned and put in a new cam...
-
Ppersistent replied to the thread 2020 6.2L: misfires, lifter issues and engine replacement.i will give the seafoam another shot. i've got an extractor, so i'll just pull a bit of oil via the dip stick tube and add in the...