rdezs's latest activity
-
Rrdezs replied to the thread Help Diagnosing Oil leak.AutoZone, not Amazon. Damn Google voice
-
Rrdezs replied to the thread Help Diagnosing Oil leak.Most auto parts stores like Amazon have them in there loaner tool collection. They're not that expensive on Amazon.
-
Rrdezs replied to the thread Help Diagnosing Oil leak.It shouldn't separate. Make sure you're using the correct puller for an LS engine. You want to pull on the center part of the balancer...
-
-
Rrdezs replied to the thread Help Diagnosing Oil leak..... Also, you'll know that your crank bolt has a rubber coating under the flange to prevent oil seeping out between the harmonic...
-
Rrdezs replied to the thread Help Diagnosing Oil leak.Did you use the proper tool to center the timing cover when you had it off for the seal? Sort of necessary for the front and rear main...
-
Rrdezs replied to the thread Help Diagnosing Oil leak.Here's a link to a set I bought on Amazon for my Hummer H2: Updated valve covers Quality was awesome, unbelievable for the price...
-
-
Rrdezs replied to the thread Warm Start stumble/multiple attempts... where to start looking?.But by all means check with a mechanical fuel pressure gauge. If the mechanical gauge shows the readings are incorrect and you have...
-
Rrdezs replied to the thread Warm Start stumble/multiple attempts... where to start looking?.That still seems rather high. I'd check with a mechanical gauge on the fuel rail to verify.... Even 82 PSI raises safety questions. GM...
-
Rrdezs replied to the thread Warm Start stumble/multiple attempts... where to start looking?.Wife got home with the 2014 Escalade, she has a 20 minute commute at highway speeds. Did the fuel pump about 9 months ago, an ACDelco...
-
Rrdezs replied to the thread Warm Start stumble/multiple attempts... where to start looking?.Did I read that right, fuel pressure rises to 100 PSI? You're lucky if the only thing leaking is the injectors into the cylinders! If...
-
Rrdezs replied to the thread Warm Start stumble/multiple attempts... where to start looking?.Definitely sounds like something we need to address with the tuner. On a side note, your coolant temperature gauge operating...
-
Rrdezs replied to the thread Front Lower Control Arm Bushing.LOL ... And a lot less effort than trying to press new bushings in!
-
Rrdezs replied to the thread Stabilitrak/Traction Control Issues.Just a good reason I suppose to always use AC Delco or genuine GM for the sensors. And based on what we discovered in my case, you can't...
-
Rrdezs replied to the thread Stabilitrak/Traction Control Issues.Found it. " Walker Products 235-1156 Engine Camshaft Position Sensor" Stay away from this item.
-
-
Rrdezs replied to the thread Stabilitrak/Traction Control Issues.They did the relearn twice with no effect prior to removing it. (And I had done it about a week earlier in the troubleshooting process)...
