Sam Harris's latest activity
-
Very common failure after the dreaded dead spot in the TPS position trace within the TPS. Then comes the Pigtail plugged into the TPS... -
Thanks @Fless yeah my pigtail had been replaced by somebody and the connections took a crap so I re-soldered them and she has been fine...
-
That actually sounds like a good idea. Definitely try that. I actually have terminals I can use to run a new temp harness. Thanks
-
As @ScottyBoy noted, the wires to (especially) the throttle body are prone to breaking underneath the insulation. If a careful...
-
Find a wiring diagram and back probe the pins at the ECU and run temporary wires to the TAC/throttle body. See if that makes any...
-
Some of the overhaul kits come with a new set of check balls...Otherwise you can go grab one from your local hard parts supplier...
-
o shoot i shoulda looked more closely at nicks' 4l80e playlist, it's in there i just missed it, this should help a ton thanks!
-
Here you go - give this a watch, will cover everything from start to finish for 4L80E VB overhauls and likely answer all of your questions:
-
@NickTransmissions is the guy to call for help here ...
-
3rd burned up for the previous owner of my 02 gmc 1500hd and i read that the sonnax sure cure valve body parts can prevent that from...
-
Sam Harris reacted to Marky Dissod's post in the thread Major upgrades GMT800, 06ish XL 2500 with
Like.
Upgrade tyranny? That kind of political talk can get you summarily banned at this 'forum' - a bit of a weird irony ... ANYWAY If your... -
Again.....why?
-
Sam Harris reacted to Scottydoggs's post in the thread Brake Booster Master Cylinder Line with Like.
pull the hose off from the pcv off and let it eat through that.
-
Why are you trying to run Seafoam thru a vacuum line to engine? If you did not know you have hydro boost, you better be clear why and...
-
Hydroboost? That should be power steering fluid. Where's the soft line end up -- at the PS pump, right? Not a vacuum line.
