strutaeng's latest activity
-
strutaeng replied to the thread 2001 GMC Yukon XL (Aka Beast).Scan the truck for codes, but the brake/abs light are likely the EBCM. I replaced the EBCM on my 99 Silverado last year, after it went... -
This looks exactly my 01 except I had barn doors. Great truck! I had the same lights/issues except mine was not due to speed sensor...
-
Here is my "Beast" it's not the best, but it is what it is. 2001 GMC Yukon XL 2500 all original for now. Seats and frame in great...
-
strutaeng replied to the thread Eric O-Exhaust Manifold Bolt Removal.Interesting. I looked up the temperature ratings on the Permatex website: Regular copper anti-seize says it's good for 1800F...
-
strutaeng reacted to OR VietVet's post in the thread Eric O-Exhaust Manifold Bolt Removal with
Like.
If anti seize had problems with heat, it would not have been recommended for years to be put on spark plug threads. -
strutaeng reacted to adventurenali92's post in the thread Out there question for the gurus that know GMT800s inside and out with Like.
Yeah I’ve seen a few examples of the Denali half ton ECSB quadrasteers. I actually like that particular truck. The back end wheel wells...
-
strutaeng reacted to adventurenali92's post in the thread Out there question for the gurus that know GMT800s inside and out with Like.
Definitely can’t trust alot of these peeps lol
-
The rears are completely isolated from the fronts. So if you open up one end, the opposite end will not get air into it. Unless of...
-
ive done calipers and just bleed the ones replaced. (id flushed the brakes in the past) trick here it to not let the master go dry. if...
-
strutaeng reacted to OR VietVet's post in the thread Out there question for the gurus that know GMT800s inside and out with Like.
https://bringatrailer.com/listing/2003-chevrolet-suburban-21/
-
Have you tried a start with the purge line open to atmosphere and not connected to the tank? I've seen new solenoids bad but of the box...
-
strutaeng replied to the thread Out there question for the gurus that know GMT800s inside and out.I've seen some Denali trucks for sale here with QS, in ECSB configuration. 1500 of course. Pretty rare, but they did make CCSB 2500...
-
strutaeng reacted to adventurenali92's post in the thread Out there question for the gurus that know GMT800s inside and out with Like.
So I joined a “Yukon Denali Only” page on fb a little while back just for shiggles….. lol it’s been an interesting show to watch. So...
-
The corrosion is the result of two dissimilar metals. Even stainless steel studs in aluminum will eventually result in corrosion. I...
-
strutaeng reacted to Charlie207's post in the thread Eric O-Exhaust Manifold Bolt Removal with Like.
The two broken bolts in my 2014 5.3 came out with just vice grips. I thought they were going to be rusted in place, but it was probably...
