swathdiver's latest activity
-
Thanks, James! Good to know. So sounds like it’s almost surely a direct bolt-in either way? -
swathdiver replied to the thread Useless Information.The rocker cover gaskets were replaced about 25K miles ago and they are weeping and maybe leaking. I tightened the VLOM bolts but did...
-
my guess would be at the sensor, either threads or middle of the connector, then oil block off plate, last would be filters didn't seal...
-
Me, I was that guy. Replaced the oil sender with another new one and did valve cover gaskets to stop the oil from leaking down from the...
-
swathdiver replied to the thread Upgrading a 1500 4x4 for travel trailer towing.Close but no cigar!
-
-
swathdiver replied to the thread hum or howl in 4wd.Sorry Dave. I'd go with them again too. Lots to choose from and reasonably priced. I "think" the difference is that older one has a...
-
Sounds like warranty claim is turning out to be a no-go. LKQ customer rep said I ordered it custom, no VIN provided, so no warranty. I...
-
I might be getting a break - I called LKQ Online today and put in a warranty claim. Still some hoops to jump through, i.e. got to take...
-
Drained the fluid today - front diff is cooked. Tons of sparkles, oil is completely silver. Time to go shopping. Going to get another...
-
New Delco hub assemblies installed. No dice - noise unchanged. It has to be coming from the front diff. I will probably let it ride...
-
I would have been fine with the noise in my front diff, but it was getting worse and worse, and the fluid was clearly full of bearing...
-
swathdiver replied to the thread Identifying 2013 6.2 Tick (attached video).Whether it's an exhaust leak from all the broken bolts or a broken valve spring, I don't think any of those has anything to do with low...
-
swathdiver reacted to j91z28d1's post in the thread Identifying 2013 6.2 Tick (attached video) with
Like.
fix all the broke bolts first. -
swathdiver reacted to donjetman's post in the thread Identifying 2013 6.2 Tick (attached video) with Like.
@thefrey Sounds like a valve train issue to me. Could be: loose/worn rocker arm lifter preload incorrect bent push rod broken valve spring
-
swathdiver reacted to thefrey's post in the thread Identifying 2013 6.2 Tick (attached video) with Like.
Here's another video perspective from the passenger side wheel well Yup, AFM won't activate when hot. It does when it's cold though...
