West 1's latest activity
-
West 1 replied to the thread Rear Main Seal.About 2 weeks ahead of you on the Oring and Oil Pan. I did the oil pan first thinking that was the main leak. It was leaking but so... -
West 1 replied to the thread Rear Main Seal.I have the tranny and transfer case out already, will start going back in tomorrow. The leak at the rear main seal plate was obvious...
-
West 1 replied to the thread Rear Main Seal.The Rear Main Seal in the LS style engines is a Teflon Rear Main seal. These can last a million miles with no leak. The LS rear main...
-
West 1 replied to the thread 07 Denali oil pressure talk.An oil pump can last a very long time. I only changed mine because I thought the Melling offered more flow. Finding metal in the pan...
-
West 1 replied to the thread 07 Denali oil pressure talk.I will go another direction and ask if you have changed the Oring on the Oil Pump pick up tube? They are known to fail and cause low...
-
West 1 replied to the thread Oil Pressure.I should have shared that the main reason I looked at the Oil pump again was an issue I had while towing heavy loads, My oil pressure...
-
I have a 2003 GMC Yukon 5.3L with 130,000 miles on it. Developed a couple oil leaks, seems to be coming from the pan gasket. There is...
-
West 1 reacted to Dadnali68's post in the thread Thoughts on greasable upper amd lower control arm bolts? with
Like.
Apparently it's common for the bolt to rust into the bushing and become stuck and need to be cut out should a repair have to happen... -
West 1 replied to the thread Thoughts on greasable upper amd lower control arm bolts?.I am struggling to understand this one, the whole idea is to adjust the upper control arms properly and then lock them in place, I think...
-
West 1 replied to the thread Why The Gen-V LT Outshines The LS.I have worked on several DI systems and they are pretty impressive. Better in every way, only negative is at high miles the intake...
-
West 1 replied to the thread 2003 Yukon Speakers went dead then battery drained.My original HVAC control that was re installed goes to sleep in less than 2 hours, once asleep the truck is drawing 34 MA at last...
-
West 1 reacted to Fless's post in the thread 2003 Yukon Speakers went dead then battery drained with Like.
I found the TSB that addresses the long time that the AUTO HVAC modules take to go to sleep, and thought I'd post it here for future...
-
West 1 replied to the thread 2003 Yukon Speakers went dead then battery drained.I inserted an avatar with a 2010 Suburban on my trailer. It had the typical one cylinder dead due to a collapsed AFM lifter. Fixed it...
-
West 1 replied to the thread 2003 Yukon Speakers went dead then battery drained.Checked voltage first thing this morning just to verify the problem is gone. The battery did not lose any volts overnight. The tests...
-
West 1 replied to the thread 2003 Yukon Speakers went dead then battery drained.Yep, maybe if you save the receipt. Oh well. At least the original is working well again.
