What is this part that is leaking coolant?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

InspectahDEck

Member
Joined
Oct 15, 2013
Posts
74
Reaction score
66
I have a coolant leak that I thought was from the thermostat housing, but after replacing that and the thermostat the leak continues. The thermostat area is completely dry, so I added some dye so I can find the leak easier. It seems to be pooling from the area circled red, I also included some photos with a uv light which shows where it's dripping down.

The part circled red, what is that which could be leaking coolant? Any help appreciated

1000007161.jpg
 

Attachments

  • 20240624_202946.jpg
    20240624_202946.jpg
    162.5 KB · Views: 8
  • 20240624_202935.jpg
    20240624_202935.jpg
    202.6 KB · Views: 8
  • 20240624_202928.jpg
    20240624_202928.jpg
    180.1 KB · Views: 8
  • 20240624_202919.jpg
    20240624_202919.jpg
    198.7 KB · Views: 7

strutaeng

Full Access Member
Joined
Aug 10, 2023
Posts
1,134
Reaction score
2,335
Location
Dallas, Texas
Yes, they make replacement gaskets for those.

Unfortunately, this picture doesn't have the entire part number. The are like $12 each IIRC. There's a pair on the front (with the crossover pipe) and another in the back of the engine (just solid little plugs like on this photo.)
 

Attachments

  • IMG_20240315_201224965.jpg
    IMG_20240315_201224965.jpg
    166.6 KB · Views: 7

Matthew Jeschke

Full Access Member
Joined
Dec 28, 2017
Posts
1,983
Reaction score
1,379
Location
Sahuarita, Arizona
It's called a coolant bypass seal (or head steam port crossover). I presume they are the same my truck took but confirm your year, make, and model on RockAuto... There they are $6.06 plus tax & shipping.


ITC billet makes an upgraded steam port crossover that takes regular o-rings. However, probably not worth it. I just used the factory one with new seals when I built my engine.
 
OP
OP
I

InspectahDEck

Member
Joined
Oct 15, 2013
Posts
74
Reaction score
66
Yeah just unscrewed the one side that was leaking, fluid started coming out so I quickly lifted the crossover just enough to put the gasket under and quickly put the bolt back in. Lost a decent amount of fluid though still, engine was still warm fwiw
 

Forum statistics

Threads
132,089
Posts
1,862,189
Members
96,557
Latest member
Harald1959

Latest posts

Top