Power Liftgate Grinding Sound

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Grady_Wilson

Supporting Member
Joined
Sep 26, 2023
Posts
588
Reaction score
1,873
Location
Wyoming / So Cal
I think you have a bad lift motor. While you're replacing that, might as well replace the tailgate struts, too. They're cheap. Stabilus brand from Rock Auto are like $12 a piece.

You might try replacing the struts first, to see if that might de-stress the lift motor enough so it doesn't skip teeth.
OP mentioned that he tried replacing the struts first thing with no luck.
 
OP
OP
spectralen

spectralen

Member
Joined
Nov 10, 2017
Posts
70
Reaction score
54
I think you have a bad lift motor. While you're replacing that, might as well replace the tailgate struts, too. They're cheap. Stabilus brand from Rock Auto are like $12 a piece.

You might try replacing the struts first, to see if that might de-stress the lift motor enough so it doesn't skip teeth.
I did that but it didn’t fix it.
The nylon gears look good, no sign of wear.
 

Attachments

  • IMG_5376.jpeg
    IMG_5376.jpeg
    204.8 KB · Views: 7
  • IMG_5381.jpeg
    IMG_5381.jpeg
    225.4 KB · Views: 8

Big Mama

Full Access Member
Joined
Jul 21, 2015
Posts
3,290
Reaction score
1,971
Location
Virginia
Did you notice if the trim panel on the left side around the strut was loose?
 

petethepug

Michael
Joined
May 4, 2016
Posts
2,853
Reaction score
3,061
Location
SoCal
Great documentation on what’s going on. Looking forward to seeing what the gremlin is going to be.
 

Johnjkerr96

TYF Newbie
Joined
Jun 1, 2022
Posts
2
Reaction score
1
I have the same problem. The trim is loose on the left side and I've tried to pop it back into place with out any success.
I did not see any comments on how to fix this.
Any help would be great
 

Big Mama

Full Access Member
Joined
Jul 21, 2015
Posts
3,290
Reaction score
1,971
Location
Virginia
My problem was the strut bent and popped off the panel. I never got it to reseat very well so I used a small piece of black gorilla tape where the 2 pieces come together until I get new clips.
 

Forum statistics

Threads
131,392
Posts
1,850,233
Members
95,481
Latest member
rescurat
Top