2011DenaliCam
TYF Newbie
- Joined
- Jul 13, 2024
- Posts
- 2
- Reaction score
- 1
I'm getting mixed answers. Owner s manual says 6....other sources say anywhere from 5 to 7. It has a cam if that matters.
How many quarts does a 2011 Yukon Denali 6.2 need? Getting mixed answers.
- Thread starter 2011DenaliCam
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
gooffeyguy
Tom
Quarts of what, oil?
If so, 6 with a filter change, then check level on dipstick
All of these motors have a camshaft. A cam won't have anything to do with oil capacity
If so, 6 with a filter change, then check level on dipstick
All of these motors have a camshaft. A cam won't have anything to do with oil capacity
OP
OP
2011DenaliCam
TYF Newbie
- Joined
- Jul 13, 2024
- Posts
- 2
- Reaction score
- 1
Yes, oil. Ok .....thanks!
intheburbs
Full Access Member
No offense, but why would you not believe the owners manual? That's kind of written by the guys who build it. I would think that's the best information.
If you're preparing to do an oil and filter change, do it and add 5 quarts. Run it for 20 or 30 seconds with it on level ground and shut it off. Let it drain down for a few minutes, then top it off to the full mark on the dipstick. Note how much it took and Robert's your mother's brother.
Similar threads
