mcasey5121
TYF Newbie
- Joined
- Jan 27, 2022
- Posts
- 2
- Reaction score
- 1
Has anyone put the Rough Country 2.5” lift on a 2023 AT4 Yukon? If so, got any pictures? How did it change the ride? Any advice…THanks!
2.5” lift 2023 AT4 Yukon
- Thread starter mcasey5121
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Bdes828
TYF Newbie
- Joined
- Nov 21, 2023
- Posts
- 1
- Reaction score
- 2
23 Yukon Denali XL. Crome delete, 3" ready lift, 35" Nitto Grapplers
ProfeZZor X
Full Access Member
3" Ready Lift here too, with 35x12.50r24 Rolling Big Power tires with 4Play forged 2pc wheels.
Last edited:
Trey Hardy
8” fabtech icon coilovers uniballs 24x14on35/15.50
Still my favorite new body style Tahoe on here bud!
Trey Hardy
8” fabtech icon coilovers uniballs 24x14on35/15.50
The lower 2.5” leveling is super easy to install and only takes about 20-30 minutes with basic tools and a floor jack
Undo the sway bar link
Unbolt the bottom strut bolts
Jack it up enough to slip the spacer under the strut
Then reassemble it’s a piece of cake don’t pay no shop 200-400$ for a 20 minute job you can do in the driveway with your harbor freight 10$ socket set!
ProfeZZor X
Full Access Member
I went with the 35's back in May, and I have to say that I'm not happy with the rubbing. I'm as far back as the frame (behind the wheel), and I still get some rubbing back there on the power running board LED clip. I'll have to make some modifications so that it clears the tire, but it's a pain in the ass that even after all this time, I still rub. I can always go back to the 33's but they look a little thin compared to the 35's, and don't fill up the wheel well as much. The ride is also nicer with the 35's, so I guess I'll have to break out the power tools again.
EDIT: I fixed the rubbing, which was the electrical chord on the power running board. I removed the end cap a few months ago to prevent more rubbing, so now I'm okay.
Last edited:
Similar threads
