No high beams

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Tuxx

TYF Newbie
Joined
Mar 22, 2023
Posts
4
Reaction score
2
So I just picked up a 2011 Tahoe ppv. All the lights work but when you push or pull on the stalk i have no high beams. Verified the bulbs are good and have power coming in and out of the fuses. Each time I pull or push the stalk you can hear the relay in the bottom of the fuse box.
also check the pigtails with the test light not getting any current.
 

GranPrix

Full Access Member
Joined
Sep 10, 2017
Posts
701
Reaction score
473
Check in front of the right wheel well if there is a flasher installed.
 
OP
OP
T

Tuxx

TYF Newbie
Joined
Mar 22, 2023
Posts
4
Reaction score
2
Check in front of the right wheel well if there is a flasher installed.
No did not see one . But I will take another look tomorrow. I trace the wires back from the pigtails did not see any interruptions in the loom or anything.
 

Joseph Garcia

Supporting Member
Joined
Aug 2, 2018
Posts
7,279
Reaction score
9,807
Welcome to the Forum from NH.

Lots of knowledgeable folks here who freely share their knowledge, experiences, and perspectives. Knowledge is power.

I hope that you will become a participating member in the Forum's discussions.

Pics of the truck, please.

You are already receiving sage advice from the knowledgeable folks on this Forum.
 
OP
OP
T

Tuxx

TYF Newbie
Joined
Mar 22, 2023
Posts
4
Reaction score
2
Thank you I'll check it out tomorrow
So I pulled the cover off of the steer column did not see any add-ons cut wires or etc.
So I am assuming it is in between the fuse box under the hood and and where are the two pigtails tee. But anyway here are some pics
 

Attachments

  • IMG_20230323_174740712_HDR.jpg
    IMG_20230323_174740712_HDR.jpg
    411.2 KB · Views: 8
  • IMG_20230323_174732841_HDR.jpg
    IMG_20230323_174732841_HDR.jpg
    277.5 KB · Views: 7
  • IMG_20230323_175549374_HDR.jpg
    IMG_20230323_175549374_HDR.jpg
    514.2 KB · Views: 7
  • IMG_20230323_174702338.jpg
    IMG_20230323_174702338.jpg
    169 KB · Views: 8
  • IMG_20230323_174658391_HDR.jpg
    IMG_20230323_174658391_HDR.jpg
    312.4 KB · Views: 8

cg95621

TYF Newbie
Joined
Jul 25, 2024
Posts
2
Reaction score
0
So I just picked up a 2011 Tahoe ppv. All the lights work but when you push or pull on the stalk i have no high beams. Verified the bulbs are good and have power coming in and out of the fuses. Each time I pull or push the stalk you can hear the relay in the bottom of the fuse box.
also check the pigtails with the test light not getting any current.
did u figure out what was the issue?
 

cg95621

TYF Newbie
Joined
Jul 25, 2024
Posts
2
Reaction score
0
So I just picked up a 2011 Tahoe ppv. All the lights work but when you push or pull on the stalk i have no high beams. Verified the bulbs are good and have power coming in and out of the fuses. Each time I pull or push the stalk you can hear the relay in the bottom of the fuse box.
also check the pigtails with the test light not getting any current.
also.i have a issue were i get no sound when i hit the lock and unlock button
 

Forum statistics

Threads
132,012
Posts
1,860,960
Members
96,439
Latest member
biggwilly50b
Top