What did you do to your 2015-2020 K2XX Tahoe/Yukon Today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Congtoid

TYF Newbie
Joined
Dec 4, 2023
Posts
20
Reaction score
27
Good evening,

Changed the rear diff oil on my 2016 Yukon w/ 98k miles. I think it has never been changed due to the color.

Followed some YT videos, and finished in 1.5 hours- I've never done this before so I took my time and did everything carefully.

I used AC Delco 10-4016 75w-90 Gear Oil, the diff took ~2.5 qts.

Here are some pics.
reardiffoil.jpg
 

Attachments

  • reardiffcasebefore.jpg
    reardiffcasebefore.jpg
    260.5 KB · Views: 4
  • reardiffmagnet.jpg
    reardiffmagnet.jpg
    159.6 KB · Views: 4
  • reardiffdrainbolt1.jpg
    reardiffdrainbolt1.jpg
    181.5 KB · Views: 4
  • reardiffdrainbolt2.jpg
    reardiffdrainbolt2.jpg
    143 KB · Views: 4

Jake707

Member
Joined
Jul 14, 2024
Posts
60
Reaction score
28
Location
Fairfield, CA
I just did this on my 17 as well, mine called for 75-85 gear oil not 90. Not sure it would make much of a difference either way but might be something to look into just in case. I think its more important to follow the guidelines of either friction adder or no friction adder which if you used the AC Delco it should be correct without adder
 

RB_Trucker

Full Access Member
Joined
Aug 26, 2015
Posts
156
Reaction score
220
Location
Redondo Beach
this upcoming weekend I will be doing the transmission fluid change for the first time on my rebuilt 6l80, its been 20k miles so this should interesting. front brakes are up also and so is a seafoam treatment for the induction system, fuel tank and I'll be putting some in the crankcase before this upcoming oil change. we will see what 115k of synthetic oil changes ( always done early) will look like after that flush out.
 

the 18th letter

Full Access Member
Joined
Feb 14, 2010
Posts
752
Reaction score
698
Location
Northern New Jersey
Went to check on the sensor harness near the exhaust for condition and all was good but one thing led to another and wound up refurbishing my spare and scraped and wire brushed the rust on the bottom. Hit it with a rattle can for now as I rarely drive in snow/salt
 

Attachments

  • IMG_0803.jpeg
    IMG_0803.jpeg
    418.5 KB · Views: 4
  • IMG_0802.jpeg
    IMG_0802.jpeg
    387 KB · Views: 4
  • IMG_0801.jpeg
    IMG_0801.jpeg
    327.8 KB · Views: 4
  • IMG_0800.jpeg
    IMG_0800.jpeg
    572 KB · Views: 4
  • IMG_0799.jpeg
    IMG_0799.jpeg
    305.7 KB · Views: 4

Congtoid

TYF Newbie
Joined
Dec 4, 2023
Posts
20
Reaction score
27
Finally trimmed the lower front valance.
Overall width is now 1 1/8”
Looks pretty trick if you ask me.
The only tools you actually need are a reciprocating saw and xacto knife. With the knife, you can carve and smooth out any jagged edges if you don’t feel like sanding the plastic down- just a keep straight hand.
Next mod is 2” front lift to level out the Yukon.
 

Attachments

  • IMG_5965.jpeg
    IMG_5965.jpeg
    320.6 KB · Views: 7
  • IMG_5966.jpeg
    IMG_5966.jpeg
    334.9 KB · Views: 8
  • IMG_5967.jpeg
    IMG_5967.jpeg
    337.3 KB · Views: 8

tom3

Full Access Member
Joined
Jul 15, 2019
Posts
1,044
Reaction score
1,601
Touchscreen on the radio system started fouling last year. Got much worse lately. See lots of Youtube videos on this. Tried a couple fixes, no help. Recalibrated the screen, helped some actually but still ghosting. Figured out that with the screen up it goes dark but the radio and XM works ok. Put the screen down on a piece of thick paper and the display works fine, backup camera also, but the touchscreen goes dead. Knobs and steering wheel controls work fine. I'll live with that but I suppose it will need the membrane and face replaced at some point.

tahoe radio hack.jpg
 

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
26,029
Reaction score
38,866
Location
Stockton, Ca.
Touchscreen on the radio system started fouling last year. Got much worse lately. See lots of Youtube videos on this. Tried a couple fixes, no help. Recalibrated the screen, helped some actually but still ghosting. Figured out that with the screen up it goes dark but the radio and XM works ok. Put the screen down on a piece of thick paper and the display works fine, backup camera also, but the touchscreen goes dead. Knobs and steering wheel controls work fine. I'll live with that but I suppose it will need the membrane and face replaced at some point.

View attachment 436234
i replaced the one in the wife's burb couple weeks ago, seems to be working fine now. it's normal for the screen to go black when in the up position.
took about an hour or so to r&r
 

the 18th letter

Full Access Member
Joined
Feb 14, 2010
Posts
752
Reaction score
698
Location
Northern New Jersey
Had to do the zip tie trick on the back of my drivers seat as the panel was falling almost every time I drove it recently. Took about 20 minutes in total, the longest part was remembering where my corded drill was since the battery died on my rechargeable.
 

Forum statistics

Threads
132,082
Posts
1,862,020
Members
96,540
Latest member
thewheel82
Top