AT4 XL - Largest Tires?

Yukondenalinewbie said:

What size tires and wheels are you running? Did you have to level it? Any trimming?

Click to expand...

285/55r22 2” RC level, 1.25” bora spacers. No air suspension tho. Minor trimming was required. Rides great.

olyelr said:

285/55r22 2” RC level, 1.25” bora spacers. No air suspension tho. Minor trimming was required. Rides great.

Click to expand...

Thank you! Mine doesn’t have the air ride suspension either.

Yukondenalinewbie said:

Thank you! Mine doesn’t have the air ride suspension either.

Click to expand...

Haaaa….well that rig isnt mine lol….i just copy and pasted what he posted earlier in the thread ha

Yukondenalinewbie said:

What size tires and wheels are you running? Did you have to level it? Any trimming?

Click to expand...

285/55/22. 1.25" spacers as well and 2" RC level. Some trimming was required as well.

JJsAT4 said:

I was able to get 33x12.5x20 Nitto Ridge Grapplers on mine. I do not have air lift. Stock wheels and no spacers. View attachment 386088View attachment 386089

Click to expand...

Seeing this setup makes me regret I only went with a stock size 275/60.

JJsAT4 said:

I was able to get 33x12.5x20 Nitto Ridge Grapplers on mine. I do not have air lift. Stock wheels and no spacers. View attachment 386088View attachment 386089

Click to expand...

So I can run those tires bone stock no rubbing are cutting On it. 33/12.50/20 stock rims

Cotton03 said:

So I can run those tires bone stock no rubbing are cutting On it. 33/12.50/20 stock rims

Click to expand...

That's going to be brand dependent most likely, I went with the stock size and I had rubbing for months, primarily in reverse at full lock.

Fit report and question:

22 AT4 XL. I used the switch suspension links and added 295/70/18. They work great. A pain to get the old ones off (I even broke a sensor) but the new ones are easy and then much easier to get to to adjust after they are on.

No rubbing and the ride is great. A little bit stiffer but I like that. Feels more truck like.

One issue I have now is that all corners are set to 39 3/4 at the bottom of the fender well but the rear drivers side won’t go above 38 1/4. Even after several adjustments.

Also, the increased ground clearance level and the 4WD level are not available. You are just riding at that increased height all the time. Entry/Exit works fine. I’m assuming the aero mode does as well.

If anyone has any recommendations for the rear or adjust higher please let me know.