Spohn arms suck.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
KidWgn

KidWgn

Certified Kid Hauler
Joined
Jan 11, 2023
Posts
352
Reaction score
474
Location
St. Louis, MO
Dustin Jackson said:
@KidWgn I haven't heard about this, what is the problem with the del sphere joints? I've had their panhard bar with those joints on for a few years and I have no complaints. But I remember that if you don't tighten the joints enough they will give you a bad time.
Click to expand...
Like I said in the first post: They're noise as hell, clunk a lot, and the rear end has never felt "tight". The trailing arms seemed to be far more of an issue than the track bar. I tightened mine down as tight as I could physically get them, with a 36" ratcheting breaker bar.

The issue I think lies in the Delrin itself. Delrin is stiffer than woodpecker lips, and doesn't lend itself well to a vibration and impact absorbing material. It's a phenomenal heat insulator though!
 
OP
OP
KidWgn

KidWgn

Certified Kid Hauler
Joined
Jan 11, 2023
Posts
352
Reaction score
474
Location
St. Louis, MO
Doubeleive said:
I have the TA performance girdle on mine which is not a big as a mag hytec even with the qa1 bar which has more curve to it than it looks like the apoc has I don't think a mag will fit.
not sure how much clearance it needs
Click to expand...
I had no idea TAP made a cover that fit our trucks! Do you run their original, or low-profile?
 
Doubeleive

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
26,113
Reaction score
39,061
Location
Stockton, Ca.
KidWgn said:
I had no idea TAP made a cover that fit our trucks! Do you run their original, or low-profile?
Click to expand...
as far as I know they only make one for the 8.5" , requires a curved panhard bar the qa1 works but they don't make them anymore also had to hit ace hardware and get different bolts the thread on the ones that are supplied with it are not the same thread.

Amazon.com

www.amazon.com
 
OP
OP
KidWgn

KidWgn

Certified Kid Hauler
Joined
Jan 11, 2023
Posts
352
Reaction score
474
Location
St. Louis, MO
Doubeleive said:
as far as I know they only make one for the 8.5" , requires a curved panhard bar the qa1 works but they don't make them anymore also had to hit ace hardware and get different bolts the thread on the ones that are supplied with it are not the same thread.

Amazon.com

www.amazon.com
Click to expand...
Girdle.jpg
 
OP
OP
KidWgn

KidWgn

Certified Kid Hauler
Joined
Jan 11, 2023
Posts
352
Reaction score
474
Location
St. Louis, MO
Doubeleive said:
ya it is the low profile then because that's the only thing you can fit on these.
Click to expand...
Interesting. They're friends of my dad's; I'll see if I can get them to send me one so we can see if it works with this bar. Not sure why the hell we'd need a girdle, but it can't hurt lol.

I've been reading up on the 9.5 Esky rear swap, and now I want one.
 
Doubeleive

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
26,113
Reaction score
39,061
Location
Stockton, Ca.
KidWgn said:
Interesting. They're friends of my dad's; I'll see if I can get them to send me one so we can see if it works with this bar. Not sure why the hell we'd need a girdle, but it can't hurt lol.

I've been reading up on the 9.5 Esky rear swap, and now I want one.
Click to expand...
I put it on there because I have broken probably 5 g80's, put a eaton tru trac in it a couple months ago as well
 
You must log in or register to reply here.

Similar threads

jeremiahm
Complete Spohn rear end 2007-2011 $300
Replies
3
Views
631
jeremiahm
jeremiahm
87carl
Spohn arms with johny joints or long travel rear
2
Replies
17
Views
3K
992dr
992dr
K
Popping thud noise 2010 tahoe ltz only hear it when roads are wet
2 3
Replies
20
Views
3K
kemperboy01
K
T3xasR3dRum
Tahoe Customization and Hybrid Resurrection
2
Replies
12
Views
3K
j91z28d1
J
M
DIY Rear control arms and suspension questions
2
Replies
12
Views
5K
992dr
992dr

Forum statistics

Threads
132,196
Posts
1,863,781
Members
96,712
Latest member
NH-Yukon

Latest posts

Top