Lowering Kits

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Minitrucker86

TYF Newbie
Joined
Aug 31, 2024
Posts
3
Reaction score
1
Looking at dropping my Yukon either 2/4 or 3/4 not fully decided yet. But my question, is the belltech or other big known brand kit really any different than the eBay kits ? I’m definitely going drop spindles and don’t care to drop the extra cash on the belltech kit if it’s really a difference in ride quality or parts quality. I’ve owned many belltech kits but never purchased a eBay kit before
 

Big Mama

Full Access Member
Joined
Jul 21, 2015
Posts
3,416
Reaction score
2,096
Location
Virginia
Are they better? Maybe. The big name suppliers are big bc they have a track record of quality. They also have everything you need in one stop.
When someone says “hey I have a kit from McGaughy” I know what they’re dealing with and most big names have great warranties.
If you’re doing spindles up front I’d want a trusted name. Same for the rear springs.
If you’re doing new rear shocks places like Arnott can be had much cheaper than OEM and have lifetime warranties.
I didn’t buy a kit bc I could only afford doing the rear first then the front but I did use McGaughy and Eibach. It’s been 13 years and all I’ve changed was the shocks front and rear.
How much are you planning to save by buying off brand parts?
 
OP
OP
M

Minitrucker86

TYF Newbie
Joined
Aug 31, 2024
Posts
3
Reaction score
1
Are they better? Maybe. The big name suppliers are big bc they have a track record of quality. They also have everything you need in one stop.
When someone says “hey I have a kit from McGaughy” I know what they’re dealing with and most big names have great warranties.
If you’re doing spindles up front I’d want a trusted name. Same for the rear springs.
If you’re doing new rear shocks places like Arnott can be had much cheaper than OEM and have lifetime warranties.
I didn’t buy a kit bc I could only afford doing the rear first then the front but I did use McGaughy and Eibach. It’s been 13 years and all I’ve changed was the shocks front and rear.
How much are you planning to save by buying off brand parts?
I’m keeping my autoride shocks and it’s about $300 difference
 

petethepug

Michael
Joined
May 4, 2016
Posts
3,100
Reaction score
3,418
Location
SoCal
The difference is $300 now. If you replace an autoride once, it’s also the last time as they’ve guaranteed for life.

Only a few shock companies do that lifetime thing. I’ve done the Koni on my VW twice since ‘98. Ordering $1,400 in new shocks and getting the same back is awesome. Especially when the Koni were originally $800 a set.

Strangely the price on autoride fell 50% from what the dealer now charges.
 

Big Mama

Full Access Member
Joined
Jul 21, 2015
Posts
3,416
Reaction score
2,096
Location
Virginia
$300 is a significant amount, to me anyway. to me. Get the 3” drop springs in a kit that includes shock extenders and carefully read reviews of any off brand parts. If one of them is Detroit Axle beware.
 

Joseph Garcia

Supporting Member
Joined
Aug 2, 2018
Posts
7,484
Reaction score
10,214
You get what you pay for, at best. Suspensions are probably an area where you don't want to experience a catastrophic failure while tooling down the highway or 20 miles out in the bush lands.
 
OP
OP
M

Minitrucker86

TYF Newbie
Joined
Aug 31, 2024
Posts
3
Reaction score
1
IMG_5330.pngIMG_5330.pngLooking at dropping my Yukon either 2/4 or 3/4 not fully decided yet. But my question, is the belltech or other big known brand kit really any different than the eBay kits ? I’m definitely going drop spindles and don’t care to drop the extra cash on the belltech kit if it’s really a difference in ride quality or parts quality. I’ve owned many belltech kits but never purchased a eBay kit
I’m keeping my autoride shocks and it’s about $300 difference
 

Big Mama

Full Access Member
Joined
Jul 21, 2015
Posts
3,416
Reaction score
2,096
Location
Virginia
I don’t have any experience with Crown or Rideco. It looks like they’re saving money on the spindles. Summit has the McGaughy kit for $589. The kit you showed says for an Escalade so check your fit before you order. If the PO didn’t already replace the compressor and shocks be thinking about that.
 

RichardCranium

Full Access Member
Joined
Dec 13, 2016
Posts
921
Reaction score
1,811
Location
Mebane, North Carolina
I'm easily over 50k miles on my Belltech kit, clearly one of the best things I did to my Tahoe. While I don't have any experience with any of the off-branded kits, and I didn't have any factory air ride, I can tell you I have zero regrets about going Belltech. The kit was complete and installation was a breeze, no headaches whatsoever. In fact the only component not replaced were the front coil springs, they were retained.

I'm about due for a freshening of shocks, just being mindful since I do take my Tahoe on road trips. Currently debating going with a full air ride to lower it a touch more, or just to remain happy with the current kit as-is and put some fresh struts/shocks on it.
 

Forum statistics

Threads
132,730
Posts
1,873,292
Members
97,559
Latest member
blanchard7684

Latest posts

Top